立定國際企業有限公司Tapping Screws,Sems Screws,12-Point Flange Screws,Square Bolts,Self Drilling Screws,Socket Cap Screws,Tap End Studs,Concrete Screws,Nylon Head Screws,St Steel Nails,; products Manufacturers,B2B Marketing-Taiwan,China,Global

登入

加入會員

求助

立定國際企業有限公司

產品型錄

共10 筆產品

選取全部

全部取消

1. 自攻螺絲

Description :
Hex washer head, hex flange washer head, pan head, flat head, truss head, oval head, round washer head.
Specification :
Please contact us for further information. We shall proceed your request and you will receive our reply very soon.

2. 組合螺絲

Description :
Material: carbon steel, alloy steel.
Specification :
1.Diameter: #2 - 5/8 (M2 - M16).
2.Length: 1/4 - 12" (6.35 - 300mm).

3. 12-Point Flange Screws

Description :
12-point flange screws: used in aircraft manufacturing and its aftermarket because of its ease of installation with pneumatic wrenches.
Specification :
Please contact us for further information. We shall proceed your request and you will receive our reply very soon.

4. 四角螺帽

Description :
1.Material: carbon steel, alloy steel, stainless steel & brass steel.
2.Grade: 4.6, 5, 5.8, 8, 8.8, 10.9, 12.9, A2, A4, B7, B7M, B8, B8M and L7.
Specification :
1.Diameter:
(1)With head - 1/4” ~ 3”(M6 ~ M80).
(2)Without head - 1/4” ~ 6”(M6 ~ M160).
2.Length: no limited under M36.

5. 自鑽自攻螺釘

Description :
1.Material: carbon steel, stainless steel.
2.Head style: hex. washer head, hex. flange washer head, pan head, flat head, thin wafer head, modify truss head, button head, oval head.
Specification :
1. Diameter: #2 - 5/16 (M2 - M8).
2. Length: 1/4 - 15" (6.35 - 400mm).
3. Point: No. 1 - No. 5.

6. 六角螺絲(栓)

Description:
1. Socket cap screw: hex socket cap screw.
2. Material: alloy steel, stainless steel.
3. Finish: black oxide.
Specification :
Please contact us for further information. We shall proceed your request and you will receive our reply very soon.

7. 螺栓

Description:
1.Material: carbon steel, alloy steel, stainless steel & brass steel.
2.Grade: 4.6, 5, 5.8, 8, 8.8, 10.9, 12.9, A2, A4, B7, B7M, L7, L7M, B8,B8M.
Specification:
1.Diameter:
(1)With head - 1/4”~ 3”(M6 ~ M80).
(2)Without head - 1/4”~ 6”(M6 ~ M160).
2.Length: no limited under M36.

8. 木螺絲

Description:
1.Material: carbon steel, stainless steel.
2.Head style: hex. washer head, flat head.
Specification:
1.Diameter: 3/16 - 1/4 (M4.80 - M6.30).
2.Length: 1 1/4 - 4" (32 - 100mm).

9. 塑膠螺絲

1.Nylon head screw: hex nylon head drilling screw.
2.Length: 13-150mm.
Specification:
1.The packing is in small box then in carton with the pallets.
2.Please contact us for further information. We shall proceed your request and you will receive our reply very soon.

10. St Steel Nails