English | 简体中文
B2B Global Marketing
  
   
 

分類 >> 電子電工 (13310) >>


  選取全部 全部取消 Send inquiry

Stainless Steel Butt Welding Fittings
21.
產品: Stainless Steel Butt Welding Fittings
Stainless steel butt weld pipe fittings, seamed & seamless. 1. 90 elbow: 1/2" to 48". 2. 45 elbow: 1/2" to 48". 3. Tee: 1/2" ...
公司: [ ] Liang Feng Stainless Steel Fitting Co., Ltd.
 
 
Puretron Direct Flow  540GPD RO System
22.
產品: Puretron Direct Flow 540GPD RO System
Puretron Direct Flow RO System supply you clean Water 540 gallons/day! With LCD Display and Elegant Compact Design No tool and storage tank required! ...
公司: [ TW] Triwin Watertec Co., Ltd.
 
 
LED Downlights
23.
產品: LED Downlights
LED Celling light is with characteristics of concise shape, good heat dissipation,solid, reliable,energy saving,environmental protection and long life. ...
公司: [ CN] SHENZHEN CREP OPTOELECTRONICS CO.,LTD
 
 
lithium-ion battery
24.
產品: Lithium-Ion Battery
Specificationss: 7.4V 2200mA echargeable battery set has no memory effect. It could be recharged more than 500 times without complete discharging and just takes approximate 3 hours to charge with our standard charger
公司: [ CN] Abundance Electronic Corporation
 
 
BT GPS
25.
產品: 藍牙GPS接收器
BT-268 integrates Bluetooth wireless with GPS positioning technology to remove the limitation range from wired GPS receiver. Also, BT-268 is easy installation, small size and quick-time-to-market in GPS receiver products. The chipset used for BT-911 is the SiRF Star III with build in flash based firmware. In addition, two stages LNA, TCXO and RTC are also included. BT-268 has quick Cold Start/ fast TTFF performance. Without any wiring requirement, BT-911 adds GPS positioning capability to any Bluetooth enabled device. BT-268 may incorporate more features suitable for applications of vehicle/ employee tracking, POI marking.
公司: [ TW] BJTEK Navigation Inc.
 
 
LED Light Bar
26.
產品: LED Light Bar
We provide a variety of warning lights such as CRM-LED model LED light bar for customers. This LED light bar can be installed on 12V or 24V DC system. ...
公司: [ ] Ching Mars Corp.
 
 
Solar Lamps
27.
產品: Solar Lamps
1. Features: (1) Super bright LED. (2) Low power consumption. (3) Long life. (4) Low voltage operation at 1.2V DC. (5) Nature or available for all ...
公司: [ CN] Lucky Light Electronics Co., Ltd.
 
 
Fan Motors
28.
產品: Motors
Item No. : KM-12inch, KM-16inch Voltage : 110V/220V Cycle : 60Hz/50Hz Power : 40W/50W Pole : 4 Thickness of silicon sheet : 12mm/16mm R.P.M.(No Load):1700/1500 Insulation : B Capacitor :2UF/250V, 1.5UF/350V,3UF/250V Oscillation : yes Temperature : Below 70 degrees centigrade *Regarding the motor specification is normal type, but we can in according to your requirement to change and revise our motor specification.
公司: [ TW] King Fortune Electrical Co., Ltd.
 
 
4K HDMI Extender Over CAT.X With IR, Serial, LAN, 100M
29.
產品: 4K HDMI Extender Over CAT.X With IR, Serial, LAN, 100M
HDBaseT HDMI Video Extender, 4K HDMI Extender Over CAT.x with IR, Serial, LAN. EVBMN-M110, transmits uncompressed HDMI video 4K 30Hz up to 70 meters and ...
公司: [ TW] Rextron International Inc.
 
 
rubber loop,shock absorber,sealing pad
30.
產品: Rubber Loop,Shock Absorber,Sealing Pad
Purposes: tennis racket,badminton racket,golf clubs
公司: [ TW] Chien Chie Rubber Technology Co., Ltd.
 
 
Brass and Copper EDM
31.
產品: 放電加工電極管
放電加工電極管 標準外徑:0.15 – 1.5 mm 標準公差: +0 ~ -0.02mm
公司: [ ] Taiwan Precision Tube Co., Ltd.
 
 
1/2U redundant power supply
32.
產品: 1/2U Redundant Power Supply
AC Input: 1.Voltage: 90~264V AC Full range. 2.Frequency:50/60Hz 3.Input current: 8A for 115V AC, 4A for 230VAC. 4.Inrush current: 60A for 115VAC, 80A ...
公司: [ ] Sure Star Computer Co., Ltd.
 
 
NC Drilling EDM Machines
33.
產品: 放電加工機
1. 5 Banks parameter data. Each set can save various machining parameters. Available to expand to 10 sets (optional). 2. Parameter data can be finely adjusted and is suited for a range of machining operations. The unit can also use preset parameter data for easy operation. 3. EDP function: point sparking (surface sparking). 4. Display mode: (DSP, Wear, Depth, END, Pn). 5. Auto/manual searching workpiece surface. 6. Auto/manual electrode compensating function. 7. Metric/inch conversion. 8. Flexible control box design for convenient increase of functionality, and the elimination of signal interference. Great compatibility.
公司: [ TW] Ocean Techologies Co., Ltd.
 
 
LED Panel Lights
34.
產品: LED Panel Lights
Mingxue 20W Led Round Panel Light are a great energy efficient alternative and they can save you money and help reduce your impact on the environment, ...
公司: [ CN] Shenzhen MingXue Optoelectronics Co., Ltd
 
 
Capacitor
35.
產品: 電容器
它有廣泛的應用前景的機器,設備或儀器,包括包裝機,所有機種與高功率
公司: [ TW] Zonkas Electronic Co., Ltd.
 
 
Rj45 With Transformer Modular Jacks
36.
產品: Rj45 With Transformer Modular Jacks
this is the evolution about the rj45 connector; the transformer/magnetic can reduce interference effectiely and accelerate the transmission speed.
公司: [ ] SUN JUN Electronics Inc.
 
 
CNC EDM Machines
37.
產品: CNC EDM Machines
Generator: 1. Employs 32 bits industrial grade computer for mximum stability, fast execution, and great memory capacity. 2. Employs advanced window display for convenient operation. 3. Automatic traverse and positioning function for three axes. 4. Maximum 1000 positioning holes for each life. 5. Over 8 modes orbiting modes. 6. Z-axis features 10 steps machining and auto change the machining parameters. 7. Parameters such as machine rigidity travel speed, arcing sensitivity, flushing height Chinese / English display and inch / metric can be set as desired. 8. Maximum memory capacity is up to 100 working files. Machining mode (single step or full steps), machining simulation, arcing height, Z-axis compensation, coordinate compensation. 9. 9 sets of home points & 100 sets of machining coodinates. 10. Digital dual voltage (high/low voltage) currents being synchronously discharged to ensure faster metal removal rate, low electrode wear and uniform surface finish. 11. Intelligent arcing auto adjustment functiion: Intelligent arcing sensor & adjust paraments to ensure best performance. 2. New "FUZZY" edition function: just input: (1) material of electrode & workpiece (2) machining depth. (3) bimaximum current & (4) minimum current, the "FUZZY" will auto set the machining parameters for each step from roughing to final finishing.
公司: [ TW] Oscare E.d.m Company Ltd.
 
 
TELEPHONE ADAPTOR
38.
產品: 電話轉接頭
轉接頭
公司: [ TW] BEST RICO ENTERPRISE CO., LTD
 
 
PM Stepper Motors
39.
產品: PM Stepper Motors
Our step motors transform impulse signals into angular or linear displacement for industrial automation, industrial manipulators, home appliances, and ...
公司: [ ] Rebeck Enterprise Co., Ltd.
 
 
MMCX Connectors
40.
產品: MMCX Connectors
MMCX series connectors are smaller than the MCX. The reliable snap-on mating design offers low RF-leakage. So, these small dimensions allow you to use ...
公司: [ ] TAIWANCAST INC.
 
 
<<上一頁 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 下一頁>>


Commerce 會員:
請登入您的 帳號 跟 密碼, 系統將自動為您填入您的相關基本資料!
 
帳號:
密碼:
記住我的帳號
 
 
填寫下列表格並寄送詢問函.所有的詢問信函將會自動寄發給你想聯絡的公司
主旨
內容 ﹙ 請勿輸入公司名稱、Email、電話、傳真、網址 ﹚
   

 


公司簡介:

*公司名稱
*E-mail
*國家
*聯絡人
網址
*電話
- -
傳真
- -
*郵遞區號
*城市
*街道地址
*企業形態
批發商   出口商 進口商 製造商
大盤商 零售商  代理商 Retrofitter 使用者
其他, 請詳細說明:
*安全密碼
請輸入所顯示的安全密碼



. .   網站導覽  l  隱私權政策  l  服務團隊  l  合作提案  l  聯絡我們  l  幫幫我  l  廣告刊登  l  B2B商業夥伴   . .
久大資訊網路股份有限公司—版權所有