English | 简体中文
B2B Global Marketing
  
   
 
公告新訊息
張貼採購公告
張貼銷售公告
依日期列表
買物者商機
賣物者公告
依分類列表
買物者分類
賣物者分類


分類 >> 機械與設備 >> 工業儀器設備 >>
           19" 儀器箱
           2D影像量測儀
           自動針織機
           酒精
           滾珠軸承防塵用毛刷
           氣流計
           氣動攪拌送漆壓力桶
           退火爐管
           高壓滅菌鍋
           噴塗室烤爐
           自動取出機
           19 儀器組合架
           氣缸
           純酒精
           切片機
           乙炔錶
           酒精測試儀
           供氣配件
           空壓機
           阿摩尼亞錶
           湧式多點銲錫機
           意見
           氣速計
           天平桌
           推進器
           計量
           空白CD-R
           電池測試計
           BDE
           水槽桌
           BDI
           離心自轉泵浦
           冷卻器
           校正實驗
           移動式層流臺
           監控台
           窗簾針織機
           除粉機
           計數器
           機櫃
           汽缸體制動器
           聯成計
           CD-R
           色彩校準系統
           CNC中心加工機
           無塵工作站
           壓縮空氣乾燥機
           砂心機
           遠心分離機
           銅箔
           免空壓離心式霧化噴霧機
           控制系統
           冷樹脂砂心機
           溫度控制器
           膜厚計
           鐵屑輸送機
           房間,套房
           比較測定機
           壓縮空氣精密過濾器
           輸送式烤爐
           密封式箱型鎔爐
           顏色設定系統
           窯業設備
           電流分流
           溝形感應熔解爐
           吸塵器用鐵片刷
           卡尺校正器
           檢重機
           自動攪拌壓力桶
           塗裝機械
           切割設備
           清洗蝕刻工作站
           稀釋器
           活塞式壓力計
           分配器
           隔膜壓力錶
           十進電阻器
           集塵機
           數位電表
           模高指示器
           試劑
           分注器
           貼合機凹版印刷機
           電子天平
           環境
           全自動對位打孔彎版機
           送料設備
           飼水淨化器
           助銲劑自動比重控制器
           流量計
           堆高機
           泡沫分離器
           殼模鑄造機
           壓花機
           萬向抽氣罩
           鑄造機
           除礦過濾器
           流量
           壓濾式脫水機
           頻譜分析儀
           飛灰集塵器
           浮選器
           集塵過濾器
           飛灰沉降器
           冷凍冷藏庫
           流量轉換器
           織品濾器
           燃料護套
           架台
           流量記錄器
           快滋生反應器
           浮球開關
           氟里昂計
           流體流量計
           鎔爐維修
           造粒機
           塊規
           夾子
           瓦斯熱水器
           發電機
           儀器
           瓦斯指示表
           氣體錶
           膠流量
           油壓緩衝器
           退火
           硬度計
           熱處理
           臥式中心加工機
           濕度計
           油壓機輸送帶
           溼度
           高壓點燃系統
           熱交換器
           壓力指示器
           耐壓絕緣測試器
           感應熔解爐
           工業用溫度計
           工業鍵盤
           感應熔解保溫爐
           製冰機工程
           即熱式電熱水器
           JPE
           實驗室傢俱設備
           實驗室排氣櫃設備
           雷射模組
           荷重計
           實驗室
           實驗室週邊附屬設備
           液位計
           雷射光筆
           襯裡
           潤滑劑
           流量開關
           輕型沖斷機
           潤滑系統
           LDPE鎖鏈袋
           雷射水平儀
           壓力計
           材料試驗機
           水銀
           電錶
           光學顯微鏡
           金屬製品製造機
           滅音器
           雙軸向測試光度計
           操作員
           針閥
           網路機櫃
           網路機架
           氮氣產生機
           注油機
           氧氣產生機
           臭氧產生機
           氧壓計
           開放式機架
           戶外型機櫃
           壓力
           酸鹼度計
           打孔機
           零件清洗機
           泵浦
           插梢規
           PU輸送帶
           模型試驗
           隔膜座
           物料傳遞箱
           塑膠機械
           電鍍塗裝膜厚計
           塑膠軟管
           壓力傳送器
           壓力計
           鍋爐
           發電機
           濾布過濾機
           蠕動式幫浦
           轉動制動器
           固定式機架
           記錄器
           標準電阻
           凹版印刷機
           振簧開關
           冷凍式乾燥機
           無桿汽缸
           膠流量測試機
           機器人
           散熱器
           集塵器
           機架
           對位
           可靠度
           分條機
           突波保護元件
           分光儀
           儲存式電熱水器
           直線機
           切張機
           近接開關
           噴霧乾燥設備
           滅菌釜
           夾鍊袋封切機(製袋機)
           浴塵及潔淨傳遞箱
           機械手臂
           設定點
           噴粉
           衝擊
           安全閥
           凝氣活瓣
           鐵片刷
           磅秤
           虹吸管
           變速器
           伺服器機架
           穩速器
           鹽水噴霧試驗機
           取出機
           電信
           地磅
           影像量測系統
           胎壓計
           恆溫器
           電話
           刀具設定儀
           定時器
           轉速計
           試驗
           感溫棒
           傳送器
           鋼製實驗桌
           溫度計
           觸控式雙波加長銲錫機
           量皮重
           精密塗裝檢測儀器
           溫度錶
           溫度
           流量指示器
           紫外線
           萬用計頻器
           真空計
           振動
           電流錶
           真空槍
           熱水器控制系統
           熱水器壓差閥
           水質控制器
           紡織
           供水配件
           配套設施
           自重控制
           冰水機
           壁掛式機架
           秤物機
           X射線感測器
           安川煞車馬達
           Y型圓柱控制閥
選取全部 取消全部
1.
主旨: [CN] KRD32 Non-standard Centrifugal Constant Acceleration Tester
KRD32 series non-standard centrifugal constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual-environmental force centrifugal motion and ...
CME Technology Co., Ltd.   Apr 18, 2024
2.
主旨: [CN] KRD11 New Design Pneumatic Vertical Shock/Bump Test Machine
KRD11 series pneumatic vertical shock/bump test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving ...
CME Technology Co., Ltd.   Apr 18, 2024
3.
主旨: [CN] Small drop tester for free-fall test
KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on， applicable ...
CME Technology Co., Ltd.   Apr 18, 2024
4.
主旨: [CN] KRD01 Series Electro-Dynamic Shakers
KRD01 series is an air-cooled electric vibration test system, with advantages of wide frequency, excellent performance, high reliability, small footprint, convenient movement, and simple operation. Capability ...
CME Technology Co., Ltd.   Apr 18, 2024
5.
主旨: [CN] KRD61 6-DOF Simulation Table
KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges connected at the top and bottom platforms respectively. ...
CME Technology Co., Ltd.   Apr 18, 2024
6.
主旨: [CN] KRD60 3-DOF Simulation Table
KRD60 Series 3 DOF simulation table simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equipment to perform sway and tilt tests to determine the ...
CME Technology Co., Ltd.   Apr 18, 2024
7.
主旨: [CN] KRD51 Transportation Bounce Test System
Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication ...
CME Technology Co., Ltd.   Apr 18, 2024
8.
主旨: [CN] KRD50 Transportation Simulation Test System
KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportation of various items of a specific load, and to evaluate ...
CME Technology Co., Ltd.   Apr 18, 2024
9.
主旨: [CN] KRD40 Drop Test System
KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading ...
CME Technology Co., Ltd.   Apr 18, 2024
10.
主旨: [CN] KRD15 Pneumatic Horizontal Shock Response Spectrum Test System
KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy ...
CME Technology Co., Ltd.   Apr 18, 2024
11.
主旨: [CN] KRD14 Pneumatic Vertical Shock Response Spectrum Test System
KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural ...
CME Technology Co., Ltd.   Apr 18, 2024
12.
主旨: [CN] KRD20 Pneumatic Bump Test Machine
The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic ...
CME Technology Co., Ltd.   Apr 18, 2024
13.
主旨: [CN] KRD16 High Impact Shock Test System
High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. ...
CME Technology Co., Ltd.   Apr 18, 2024
14.
主旨: [CN] KRD13 High Acceleration Shock Test System
KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. ...
CME Technology Co., Ltd.   Apr 18, 2024
15.
主旨: [CN] KRD12 Pneumatic Horizontal Shock Test System
The KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in ...
CME Technology Co., Ltd.   Apr 18, 2024
16.
主旨: [CN] KRD10 Hydraulic Vertical Shock Test System
KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products ...
CME Technology Co., Ltd.   Apr 18, 2024
17.
主旨: [CN] KRD30-10 Box Type Constant Acceleration Centrifugal Test Machine
KRD30 series centrifugal constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment ...
CME Technology Co., Ltd.   Apr 18, 2024
18.
主旨: [CN] KRD101 Packaging Compression Tester
KRD101 Series Packaging Compression Tester is designed to evaluate the compressive strength of packaging in order to prevent the product from deforming or being damaged during handling, stacking, storage, ...
CME Technology Co., Ltd.   Apr 18, 2024
19.
主旨: [CN] KRD102 Clamping Force Tester
KRD102 series clamping force tester is an indispensable test method for improving products into high-quality fields. It is suitable for research, development, quality control and manufacturing of electronics, ...
CME Technology Co., Ltd.   Apr 18, 2024
20.
主旨: [CN] KRD30 Centrifugal Constant Acceleration Tester (Box Type)
KRD30 series centrifugal constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment ...
CME Technology Co., Ltd.   Apr 18, 2024
1. 2.

. .   網站導覽  l  隱私權政策  l  服務團隊  l  合作提案  l  聯絡我們  l  幫幫我  l  廣告刊登  l  B2B商業夥伴   . .
Copyright©2024, G.T. Internet Information Co., Ltd. All Rights Reserved.