登入 加入會員 求助
 
名研電機工業股份有限公司
 
Recommended Results 
 
   產品型錄 10 筆 產品
 
全部取消
1.    Isotropic Magnets . Anisotropic Magnets

Isotropic Magnets . Anisotropic Magnets

詳細說明

寄出詢問函



2.    Magnetic Application

Magnetic Application

詳細說明

寄出詢問函



3.    Magnetic Application

Magnetic Application

詳細說明

寄出詢問函



4.    Magnetic Application

Magnetic Application

詳細說明

寄出詢問函



5.    Plastic Injection Magnet Series

Plastic Injection Magnet Series

詳細說明

寄出詢問函


Plastic Magnets produced by injecting have better crush-resistance, compressive strength and the best accuracy.

If magnets are hard to be produced by pressing, or magnets are very thin, or magnets are easy to be crashed, then the way of ...
6.    Rare Earth Magnets

Rare Earth Magnets

詳細說明

寄出詢問函


Rare Earth Magnets have the strongest energy. There are several different materials, including Neodymium Ferrite Boron Magnet, MQ Magnet, and SmCo5 magnet. Except SmCo5, they both need surface coating with zinc, nickel, or epoxy to avoid oxidizing ...
7.    Rare Earth Magnets

Rare Earth Magnets

詳細說明

寄出詢問函


Rare Earth Magnets have the strongest energy. There are several different materials, including Neodymium Ferrite Boron Magnet, MQ Magnet, and SmCo5 magnet. Except SmCo5, they both need surface coating with zinc, nickel, or epoxy to avoid oxidizing ...
8.    Isotropic Magnets . Anisotropic Magnets

Isotropic Magnets . Anisotropic Magnets

詳細說明

寄出詢問函


But the spread of the magnetic field is very different between Isotropic Magnets and Anisotropic Magnets. There is no magnetic field during pressing for Isotropic Magnets, so there will be more ways to magnetize after sintering than Anisotropic ...
9.    Isotropic Magnets . Anisotropic Magnets

Isotropic Magnets . Anisotropic Magnets

詳細說明

寄出詢問函


But the spread of the magnetic field is very different between Isotropic Magnets and Anisotropic Magnets. There is no magnetic field during pressing for Isotropic Magnets, so there will be more ways to magnetize after sintering than Anisotropic ...
10.    Plastic Injection Magnet

Plastic Injection Magnet

詳細說明

寄出詢問函


Plastic Magnets produced by injecting have better crush-resistance, compressive strength and the best accuracy.

If magnets are hard to be produced by pressing, or magnets are very thin, or magnets are easy to be crashed, then the way of ...

Commerce 會員:
請登入您的 帳號 跟 密碼, 系統將自動為您填入您的相關基本資料!
 
帳號:
密碼:
記住我的帳號
 
 
填寫下列表格並寄送詢問函.所有的詢問信函將會自動寄發給你想聯絡的公司
主旨
內容 ﹙ 請勿輸入公司名稱、Email、電話、傳真、網址 ﹚
   

 


公司簡介:

*公司名稱
*E-mail
*國家
*聯絡人
網址
*電話
- -
傳真
- -
*郵遞區號
*城市
*街道地址
*企業形態
批發商   出口商 進口商 製造商
大盤商 零售商  代理商 Retrofitter 使用者
其他, 請詳細說明:
*安全密碼
請輸入所顯示的安全密碼


網站導覽 l 隱私權政策 l 服務團隊 l 合作提案 l 聯絡我們 l 幫幫我 l 廣告刊登 l  B2B商業夥伴
Copyright©2022, G.T. Internet Information Co., Ltd. All Rights Reserved.     .