產品資訊 - Retread Tile Adhesive->Epoxy Adhesive

登入

加入會員

求助

Guangzhou Mebong Architectural Decoration Co., Ltd.

	Recommended Results

Retread Tile Adhesive

產品分類 :

化學->其他->環氧樹脂黏合劑

產品規格

Model No:	PB-02

Country	CN
Brand	Mebong
Materials	cement
Size	25kg/bag
Weight	25kg
Color	white,gray
Packing	25kg/bag
Minimum Order	20 bags
Payment Term	TT

產品描述

Features:
1, Particularly strong bonding power, applied for pasting large-sized ceramic tile, grassing stone and natural stone material indoor and outdoor.
2, Light steel-frame system board, like indoor paste ceramic tile gypsum board and Eterpan.
3, Can be used on the low water-absorption surface, like pasting new ceramic tile above the old ones, and pasting ceramic tile on the firm surface.
4, Excellent flexibility, can bear the stretch of the bonding layer that caused by temperature difference.
5, Good anti-infiltration function.
6, No need to wet the brick wall, effectively improve the efficiency.

Surface Treatment:
1, The substrate surface should be firm, dry and clean, no grease, no wax, no concrete curing agent, no release agent and other loose materials.
2, For the new wall, when leveling the cement mortar, should improve the mortar mark to strengthen the bonding power between the leveling layer and the wall, or mix Mebong Emulsion 100. Specific information please refer to the Mebong Emulsion 100 introduction.

Operation Process:
1, Using a tooth scraper to scrap the adhesive onto the surface evenly, control within 1㎡.
2, Push the ceramic tile or heavy type ceramic tile above it directly.
3, For the tile or stone material with deep ditch, not only scrape the surface, but also the backside of the tile or stone.
4,Can be used for retreading the old ceramic tile .

Cautions:
1, Never mix the dry slurry with water for second use.
2, For the light wall pasting large-sized decorative boards, like gypsum board and Eterpan, confirming the wall firmness before operation.
3, For the painting surface, make sure the initial bond strength and have no cavitation.
4, Operating under 5℃~40℃.
5, Clean the surface by slightly wet sponge or cloth before it dried.
6, Leave 1.5mm joint space between two tiles, suggesting MB-MC Color Mould-resistant Grout.

其他類似產品