耐安凡而工業股份有限公司

登入

加入會員

求助

耐安凡而工業股份有限公司

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

產品型錄

共10 筆產品

選取全部

全部取消

1. Cast Steel Y Type Strainer

1.Y-PATTERN
2.BOLTED COVER WITH DRAIN PLUG
3.PERFORATED STAINLESS STEEL SCREEN
4.AVAILABLE WITH 40 - 200 MESH SCREEN

2. Cast Stainless Steel Y Type Strainer

1.Y-PATTERN
2.BOLTED COVER WITH DRAIN PLUG
3.PERFORATED STAINLESS STEEL SCREEN
4.AVAILABLE WITH 40 - 200 MESH SCREEN

3. Cast Steel Ball Valve

- FULL PORT
- FIRE SAFE CONSTRUCTION
- TWO PIECE BODY
- FLOATION BALL TYPE
- ANTI-STATIC DEVICE
- BLOW OUT PROOF STEM
- STOPPER DEVICE
- ISO 5211 MOUNTING PAD
- FLANGED ENDS
- BUTTWELDING ENDS

4. Forged Stainless Steel Globe Valve

1.OUTSIDE SCREW AND YOKE
2.BOLTED BONNET (PRESSURE SEAL BONNET FOR 1500LBS & OVER)
3.LOOSE DISC
4.INTEGRAL SEAT
5.RISING STEM AND HANDWHEEL

5. Cast Steel Globe Valve

1.OUTSIDE SCREW AND YOKE
2.BOLTED BONNET (PRESSURE SEAL BONNET FOR 1500 LBS)
3.YOKE INTEGRAL WITH BONNET
4.LOOSE DISC
5.RENEWABLE SEAT RINGS
6.RISING STEM AND HANDWHEEL
7.AVAILABLE WITH GEAR OPERATOR
8.AVAILABLE WITH ACTUATOR

6. Forged Steel Gate Valve

1.OUTSIDE SCREW AND YOKE
2.BOLTED BONNET (PRESSURE SEAL BONNET FOR 1500LBS & OVER)
3.WEDGE DISC
4.RENEWABLE SEAT RINGS
5.RISING STEM AND NON-RISING HANDWHEEL

7. Cast Steel Gate Valve

OUTSIDE SCREW AND YOKE
1.BOLTED BONNET (PRESSURE SEAL BONNET FOR 1500 LBS)
2.FLEXIBLE WEDGE, FULLY GUIDED
3.RENEWABLE SEAT RINGS
4.RISING STEM AND NON-RISING HANDWHEEL
5.AVAILABLE WITH GEAR OPERATOR
6.AVAILABLE WITH ACTUATOR
7.AVAILABLE ...

8. Cast Steel Gate Valve

Design Description :
- OUTSIDE SCREW AND YOKE
- BOLTED BONNET
- FLEXIBLE WEDGE, FULLY GUIDED
- RENEWABLE SEAT RINGS (INTEGRAL
- SEAT AND BACK SEAT FOR STAINLESS STEEL)
- RISING STEM AND NON-RISING HANDWHEEL
- AVAILABLE WITH GEAR OPERATOR
- ...

9. Cast Steel Globe Valve

Design Description :
- OUTSIDE SCREW AND YOKE
- BOLTED BONNET
- RISING STEM AND HANDWHEEL
- RENEWABLE SEAT RINGS (INTEGRAL SEAT AND BACK - SEAT FOR STAINLESS STEEL)
- LOOSE DISC
- AVAILABLE WITH GEAR OPERATOR
- FLANGED ENDS
- BUTTWELDING ...

10. Cast Steel Check Valve

Design Description :
- BOLTED COVER
- SWING TYPE
- RENEWABLE SEAT RINGS (INTEGRAL SEAT
- FOR STAINLESS STEEL)
- FOR HORIZONTAL OR VERTICAL LINES
- FLANGED ENDS
- BUTTWELDING ENDS

Material :
- CAST STEEL
- CAST STAINLESS STEEL

Ratings: ...