產品資訊 - Customized CNC Engineering Plastic UHMWPE Part->chemical

登入

加入會員

求助

Yangzhong Haiteng Fluorine Plastic Product Factory

	Recommended Results

Customized CNC Engineering Plastic UHMWPE Part

產品分類 :

化學->其他->化學製品

Customized CNC Engineering Plastic UHMWPE Part

產品規格

Model No:	UHMWPE Part

Country	CN
Brand	HAITENG
Packing	Paper Box
Minimum Order	100
Payment Term	L/C,T/T,D/P

產品描述

Customized CNC Engineering Plastic UHMWPE Part


 



Characteristics 
1. Very high-wear resistance, seven times wear resistance than steel, four times than PTFE 
2. Very high anti-impact resistance, two times impact resistance than PC, five times than ABS. 
3. Good self-lubrication, the same as PTFE, better than steel and brass appended lubricating oil. 
4. Good anti-corrosion resistance, it has very stable chemicals property and can endure the    corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity. 
5. Very high-inadhesion resistance, the surface of product hardly affixes other material. 
6. Very high-impact resistance, ten times impact resistance than PA66, eight times than PTFE. 
7. Good low temperature resistance, in liquefied nitrogen (- 196ºC), it still has the prolongation. 
few other materials can reach to this performance. 
8. Non-toxic and clean property, UHMW-PE material that made by Guangzhou Engineering Plastics Industries (Group) Company.


 



Images


<img src="http://i.bosscdn.com/product/74/6e/f8/eb52228ff10054ea111ddf367f.jpg" title="Customized Uhmwpe Part" alt="Customized Uhmwpe Part" />

<div align="left">
<img src="http://i.bosscdn.com/product/46/69/8d/86e88100c05150528655f5322d.jpg" title="Contact Info" alt="Contact Info" /> 
</div>
UHMW PE is a kind of
engineering plastic with medium price and superior properties. It has
almost combines all excellent properties of plastics. It has excellent
abrasion resistance, high impact resistance, self-lubricating properties
,outstanding ability against cold ,eco-friendly ,and light weight. 
 
Technical Data Sheet
<table style="width:704px;" class="tcs ke-zeroborder" cellspacing="0" cellpadding="0" border="0">
<tbody>
<tr>
<td>
PROPERTIES
</td>
<td>
Unit
</td>
<td>
Value
</td>
</tr>
<tr>
<td colspan="3">
I.Physical Properties
</td>
</tr>
<tr>
<td>
Density
</td>
<td>
g/cm3
</td>
<td>
0.96
</td>
</tr>
<tr>
<td>
Water absorption 24hrs
</td>
<td>
%
</td>
<td>
0.01
</td>
</tr>
<tr>
<td colspan="3">
II.Thermal Properties
</td>
</tr>
<tr>
<td>
Heat deflection temperature - HDT/A
</td>
<td>
ºC
</td>
<td>
42
</td>
</tr>
<tr>
<td>
Min. service temperature
</td>
<td>
ºC
</td>
<td>
-269
</td>
</tr>
<tr>
<td>
Max. service temperature-Long Term
</td>
<td>
ºC
</td>
<td>
90
</td>
</tr>
<tr>
<td>
Thermal conductivity at 23 ºC
</td>
<td>
W/(K*m)
</td>
<td>
0.42
</td>
</tr>
<tr>
<td>
Coefficient of linear thermal expansion
</td>
<td>
10-4*K-1
</td>
<td>
2
</td>
</tr>
<tr>
<td>
Flammability Rating(6mm thickness)
</td>
<td>
-
</td>
<td>
HB
</td>
</tr>
<tr>
<td colspan="3">
III.Mechanical Properties at 23ºC
</td>
</tr>
<tr>
<td>
Tensile strength at yield
</td>
<td>
MPa
</td>
<td>
17
</td>
</tr>
<tr>
<td>
Tensile strength at break
</td>
<td>
Mpa
</td>
<td>
40
</td>
</tr>
<tr>
<td>
Elongation at break
</td>
<td>
%
</td>
<td>
>50
</td>
</tr>
<tr>
<td>
Modulus of elasticity after tensile test
</td>
<td>
MPa
</td>
<td>
650
</td>
</tr>
<tr>
<td>
Modulus of elasticity after flexural test
</td>
<td>
MPa
</td>
<td>
800
</td>
</tr>
<tr>
<td>
Hardness - Shore D
</td>
<td>
 
</td>
<td>
61
</td>
</tr>
<tr>
<td>
Charpy impact strength
</td>
<td>
kJ/m2
</td>
<td>
N. B.
</td>
</tr>
<tr>
<td>
Friction coefficient
</td>
<td>
 
</td>
<td>
0.25
</td>
</tr>
<tr>
<td colspan="3">
IV.Electrical Properties  at 23ºC
</td>
</tr>
<tr>
<td>
Dielectric constant at 1 MHz
</td>
<td>
106Hz
</td>
<td>
3.1
</td>
</tr>
<tr>
<td>
Dielectric loss factor at 1 MHz
</td>
<td>
106Hz
</td>
<td>
0.0001
</td>
</tr>
<tr>
<td>
Volume resistively
</td>
<td>
Ohm (Ω) * cm
</td>
<td>
>1014
</td>
</tr>
<tr>
<td>
Surface resisively
</td>
<td>
Ohm (Ω)
</td>
<td>
>1011
</td>
</tr>
<tr>
<td>
Dielectric strength
</td>
<td>
kV/mm
</td>
<td>
45
</td>
</tr>
<tr>
<td colspan="3">
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
</td>
</tr>
<tr>
<td>
 
</td>
<td>
 
</td>
<td>
 
</td>
</tr>
<tr>
</tr>
</tbody>
</table>
 

 

<div>



<div align="left">
<img src="http://i.bosscdn.com/product/fa/5d/d3/ed6b2c340d8e5e34935edac468.jpg" title="ptfe manufacture" alt="ptfe manufacture" /><img src="http://i.bosscdn.com/product/8f/6f/80/c2ff557432a5d977846b0d620d.jpg" title="ptfe manufacturer in China" alt="ptfe manufacturer in China" /> 
</div>
</div>

 
plasticptfe.com

其他類似產品