產品資訊 - CESMB Timer-Control Lubricator->oil pump

登入

加入會員

求助

彰化振榮油機股份有限公司

	Recommended Results

CESMB Timer-Control Lubricator

產品分類 :

機械與設備->機械零配件(元件)->集中潤滑給油裝置->油泵

產品規格

Size	176*248mm
Materials	Alumin&Plastic
Minimum Order	0

產品描述

1.CESA/B and CESMB series of products have been proved ISO9001 by the Ministry of Economic Affairs, R.O.C. of Bureau of Standards, Metrology and Inspection.
2.CES resistance type electric lubricator series include CESA/B, CESMA/B, CESC and CESS type, and the accessories are different by each model. Please refer to the specification for further details.
3.The interval time could be set up on request (2, 3, 5, 10, 15, 30, 60 minutes) and supply the power, the lubricator will work automatically.
4.The discharge volume could be set up on request and customers can adjust it by themselves. The standard specification of discharge volume is 3-6 cc/stroke, 1-6 cc/stroke is also on request.
5.This unit has fixed output pressure device, and adding a pressure gauge can inspect if the output pressure works normally.
6.CES series used a synchronous motor, a worm gear and a worm shaft working together.
7.The function of CESMA and CESMB is similar but CESMB has a float switch for checking the oil level. About CESB type, the standard specification of float switch is NO (Normal Open) contact, which means when the oil level is normal, it will have signals. NC (Normal Close) contact is also on request.
◆Application of Machines Equipment:
1.It is suitable for the machinery which needs fixed interval time and discharge volume.
2.It usually works with desktop lathes or carpentry machinery.
（一）CESMA/B抵抗式電動注油機
◆特點
1.CESA/B、CESMB系列產品之品質管理系統，取得經濟部標準檢驗局ISO9001認可登錄。
2.CES抵抗式電動注油機依據有無裝設浮動開關、配線方式等，可區分為CESA/B、CESMA/B、CESC與CESS 1￡型，請參與規格表。
3.定時定量自動給油，即間歇時間與吐出量均固定，運作規律，操作簡便。
4.出廠前依客戶需求設定固定間歇時間，接上電源即可自動運作。
5.吐出量標準品為3-6cc，亦可訂作1-6cc，吐出量出廠前可依客戶需求先行固定，客戶亦可自行調整。
6.本機為固定吐出壓裝置，因此加裝壓力錶，可檢測每次之吐出壓有無異常。
7.CES系列使用同步馬達，帶動渦輪（或稱齒輪）、渦桿一起運轉。
8.CESMA型與CESMB型之差異僅在於後者裝設有浮動開關，能檢測油位異常。CESMB型浮動開關標準規格為上通電接點，即油位正常時會產生訊號，亦可選擇下通電接點，訂購時請先註明。
◆適用之機械設備
1.特別適用於須有固定間歇時間與吐出量之機械設備。
2.一般常用於桌上車床、木工機等機械設備。

其他類似產品