產品資訊 - T Type piston volume distributor->components for weapon system

登入

加入會員

求助

彰化振榮油機股份有限公司

	Recommended Results

T Type piston volume distributor

產品分類 :

機械與設備->機械零配件(元件)->管路系統->管路配件

產品規格

Materials

Zn;鋅製品

產品描述

T型檢知容積式分配器
特點
1.特點是「油量固定」，亦即每個潤滑點可獲得同樣的潤滑油量。
2.型均有多種吐出量可供選擇：0.1cc、0.2cc、0.3cc、0.4cc、0.5cc，訂購時請先告知孔數與每孔預定之吐出量。。
3.每個出油孔均有檢知棒，具檢知功能，可目視動作是否異常，如再選搭微動開關，可於動作或間歇時產生訊號，更容易觀察動作狀態。
4.型檢知容積式分配器每次動作時均將潤滑油儲存於分配器油管內，而於每次間歇時注油。
5.具微動開關裝置，客戶可自行設定為NO（常開）或NC（常關），亦可兩者皆設定。設定為NO微動開關時，會於每次動作儲油時產生訊號，設定為NC微動開關，則會於每次間歇注油時產生訊號。
6.須搭配脫壓式機油注油機使用，最低啟動壓力則為8kgf/㎝²，最高工作壓力為30kgf/㎝²。
7.使用油品之黏度範圍：機油32-90 cSt＠40℃。

T Type Detective Volume Distributors
Features:
1.Fixed amount of oil feeding. The lubrication points of volume distributor supply a fixed flow of lubricant.
2.T type have many kinds of discharge volume to be chosen: 0.1, 0.2, 0.3, 0.4, 0.5 ccm/stroke. As ordering, please details the discharge volume wanted.
3.The standards are assembled detective piston, which can observe if operation is normal.
4.T type volume distributors have to work with pressure-relief type lubricators, and lubricant will feed during the operation time of the lubricator.
5.T type could be assembled NO (Normal Open) or NC (Normal Close) contact on request, which would make symbols during operation or intermittent time, it’s easier to observe.
6.T type can be used with grease or oil pressure-relief type lubricators.
7.The lowest operation pressure of T, CDB is 8 kgf/㎝², and the max pressure is 30 kgf/㎝².
8.The viscosity range of oil is 32-90 cSt @ 40℃.