bicycle seat and motorcycle seats molded foam machine
Product Application
High pressure foaming machine is to make all types of soft and rigid foam, including: car/motorcycle/bicycle seat cushion, furniture seat cushion, office chair, pillow, flow deflector, dash board, sun visor, insulation material, refrigerator, refrigerated truck, roof insulation board, decorating materials and other types of polyurethane products.
u foaming machine,pu pillow foaming machine,pu injection machine
Main Features:
1. Most of the components of the machine are imported; 2. The injecting head is self-clean; 3. The raw material can mix better and evenly after the high pressure mixing; 4; PLC controlled and high efficient under any production condition; 5. Easy to maintain and operate.
Technical details for high pressure foam machine
Model NO.:LZGY-907
Gross Power: 26KW,4*380V/600HZ
Applicable Foaming: Flexible.
Injecting Flux:266g-850g/S(Attention:the flux could be configured)
Injecting Pressure:0.1MPA-15MPA
The mix proportion:100:35-65
Viscosity(22°) POLY 500-2000MPAS
Viscosity(22°) ISO 500-2000MPAS
Time of injecting:0.01-9.99/S(precision 0.01S)
Precision of injection:0.1/100
Process of injecting:Manual inject by PLC programmed
Pneumatic operating pressure: 0.6-0.8MPa
Area: 6800*5380(L*W)
Machine Weight:2300KG
High Pressure Pouring Head: Sino-Korean Joint Venture
A. Self-cleaned; B. “L” Type; C. 3-times repeated mixing; D. Never stick and no flushing; D. Can be poured over 600,000 times;
System software and controlling program: 7 inch touch screen, Made in Taiwan
Main Parameter for Turntable-Typed Production Line:
Mild-steel Plate of Work station 3MM;
Water heating tank: 150L, stainless steel, 18KW
Water cycle Tube: stainless steel 304 with tie-in
Motor Driving: 3Kw
Transducer: 1 unit
Gross power: 28KW
