和俐鑽頭有限公司 – 線上商品分類

登入

加入會員

求助

和俐鑽頭有限公司

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. Rail Hole Cutter

Rail Hole Cutter designed for using in high-speed railway rails and mass rapid transit rails, etc.
High quality carbide tips
Strong welding increases long Life.
Smooth cutting edges tooth geometry reduces vibration.
Weldon shank suitable for all kind of rail drilling machine
With its very precise and sharp tungsten carbide tipped cutting edges.
The hole cutter can be run at higher feed rates and speeds to create holes of exceptional quality and accuracy.

Size
Outer diameter: 18~36mm
Useable length: 25mm, 35mm

2. Carbide Tipped Hole CUtter

Standard Carbide Tipped
Especially drill on Stainless Steel Plate, F.R,P, Copper Plate, Iron Plate, Brass Plate, Alumium Plate,
Alloy Steel Plate, Electrical Controller Box, Channel Iron for 5mm thickness stainless steel sheet.

Powerful Carbide Tip
Sharp cutting edge provide less resistance
Especially drill on Stainless Steel Pipe, Tubes or Sheet with rough surface for 5mm thickness stainless steel sheet
and 10mm thickness steel sheet. (Need to remove ejection)

APPLICATION:
1. Aluminum doors & windows.
2. Plumbing works and building A/C works.
3 Electrical control boxes and cable and arrangement.
4. Yacht building, ship-building industry and F.R.P. industry.

Hole Cutter-3/4" 19mm
Hole Cutter-7/8" 22mm
Hole Cutter-1" 25mm
Hole Cutter-1-1/8" 29mm
Hole Cutter-1-7/32" 31mm
Hole Cutter-1-1/4" 32mm
Hole Cutter-1-3/8" 35mm
Hole Cutter-1/7/16 37mm
Hole Cutter-1-1/2 38mm
Hole Cutter-1-3/4 44mm
Hole Cutter-2" 51mm
Hole Cutter-2-1/2" 64mm
Hole Cutter 4piece (7/8,1-1/8,1-3/8)
Hole Cutter 8pieces (7/8,1-1/8,1-3/8,2",2-1/2)
Pilot Bit