產品資訊 - Concrete foundation waterproof coating cement->Other Packaging Materials

登入

加入會員

求助

UMS Building Material Co.,Limited

	Recommended Results

Concrete foundation waterproof coating cement

產品分類 :

機械與設備->包裝機械->其他包裝材料

Concrete foundation waterproof coating cement

產品規格

Model No:	WWP003#

Country	CN
Brand	UMS
Packing	Component A: 20KG/barrel Component B: 10KG/barrel
Minimum Order	800
Payment Term	L/C,T/T,Money Gram,Western Union

產品描述

<h1>
Concrete foundation waterproof coating cement
</h1>

Concrete Foundation Coating Is a two-component polymer modified cement waterproof material, the liquid material is made of polymer emulsion and other additives through a special process, the powder is made of cement, quartz sand, inorganic filler through high-tech special processing and processing to make.Foundation Coating Cement, Liquid material and powder mixed into a waterproof coating. With strong bonding, impermeability, water resistance and good characteristics, are non-toxic, harmless, pollution-free green products.  Foundation Waterproof Coating.






Features
of Waterproof Paint


Excellent waterproofing performance


Non-toxic ideal for water tanks and other
water containers


Strong adhesion to various substrate


Cement based material can connection in
substrates


Weather resistant performance


Application
range 


Polymer composite waterproof paint is
applied to most substrates, walls, facades, foundations, retaining walls,
swimming pools, planters, wet room floors, water tanks, etc.


Bridge Waterproof Paint, Waterproof Paint
For Bathroom, Waterproof Paint For Basement, Waterproof Roof Coating-



<img src="http://i.bosscdn.com/product/a8/9f/6e/aa40d8b52f0338328c2894b05a.png" width="654" height="654" title="concrete foundation coating" alt="concrete foundation coating" />



 


 


How
to apply the Waterproof Paint For Concrete


1) Mix the powder material with the liquid
material proportionately (The ratio of power material to liquid material is: one
component: 0.8:1, two component: 1:1 by weight), then fully stir it for 3-5
minutes until it become jelly staff with no obvious particles and sediments. It
would be quite appreciated if the mixing materials could be laid aside for a
while before stirring.


2) Brushing on the substrate directly and
completely. 2-3 coatings in total are preferred according to real application
condition. Brush repeatedly to ventilate the gas if any bubble is formed when
brushing. The thickness of each coating should be 0.5mm.


3) Re-coating (second coating) should be
applied only after the surface dry of first coating ( touch dry , it will take
1-2 hrs at normal temperature of 25-30℃), the direction of brushing should be vertical to previous coating.
Moisturize previous coat by spraying mist on it if it is solidified before
second coating.


 


<img src="http://i.bosscdn.com/product/2a/e7/1b/d0e401e83ac2f677d02c640503.jpg" width="669" height="667" title="foundation coating cement" alt="foundation coating cement" /> 






Attentions


Ventilation equipment should be applied to
speed the dry up of the coating when the application areas are damp or stuffy,
especially when sealing the drinking water pool or basement.


The paint should be applied at the
temperature of 5-40℃, but avoid application in the rainy open air.


Substrate should be firm, clean without
dirt, oil stains and any other impurities. Any holes, cracks on the surface of
the substrate should be pre-sealed by grouting mortar.


Moisturize the substrate before paint
application but make sure no obvious droplet on it.


The stirring materials should be used up
within 30 minutes. 


If the mixing material is too thick, max 3%
water is allowed to be added to thin the mixture. 


Pre-application: Moisturize the
substrate before the paint application but make sure no obvious droplet on
it. 


Post-application: Avoid stepping on, scratching,
exposing to the rain or sunlight until the coating is fully dried and
solidified.

Post-coating Maintenance: It is suggested that the coating should
be sprayed mist or covered by wet cloth for 2-3 days after 24 hours of
application. The maintenance processing time will be shortened if surrounding
environment is well ventilated (Post-coating maintenance will further effect
the waterproof performance).

 
ums-factory.com

其他類似產品