產品資訊 - Galvanized double layer roof panel machine->Engineering machinery

登入

加入會員

求助

Botou Golden Integrity Roll Forming Machine Co.,Ltd

	Recommended Results

Galvanized double layer roof panel machine

產品分類 :

機械與設備->土木建設機械->其他->工程機械

Galvanized double layer roof panel machine

產品規格

Model No:	double layer forming machine

Country	CN
Minimum Order	1
Payment Term	L/C

產品描述

Galvanized double layer roof panel machine


 



If you want to save space and cost,double layer roll forming machine is your best opition.One machine can make two design,but shortage it that they can not run at same time.Cause they share one motor and one guillotine.


A double layer roll forming machine has two layers or two levels of roll forming parts which gives it another name dual level roll forming machine, and because this machine makes two metal sheets.IBR and corrugated double layer roll forming machine used a lot in Africa.


 

 1.Main parameters of double layer mahcine : 
   Parameters of raw material
<div class="rich-text-table">
<table style="width:465px;" bordercolor="#000000" border="1">
<tbody>
<tr>
<td>
Material
</td>
<td>
Thickness
</td>
<td>
I.D 
</td>
<td>
Yield Strength
</td>
</tr>
<tr>
<td>
Q235 
 gi&ppgi& galvalume
</td>
<td>
0.25-0.7mm
</td>
<td>
508mm
</td>
<td>
<=235mpa
</td>
</tr>
</tbody>
</table>
</div>
Decoiling →  Roll Forming  →Hydraulic cutting→Collecting table 
2.Photos of Machine: 
   
  <img src="http://i.bosscdn.com/product/cd/3d/54/1c1bf1cd9303b124b4676b1c1e.jpg" title="Double Layer Forming Machine" alt="Double Layer Forming Machine" /> 
3.Technology parameters: 
The weight of machine is about3.1tons.The total dimension of machine:6800(L)*1200(W)*1500mm(H) 
3.1Manual decoiler: 
Capacity of uncoiler:5tons  
Expansion of segment:Manual  
Rotation of segment:Manual   
Number of segment:4 
Range of segment expansion:480-520mm  
Operation method:Manual   
Qty: 1 
3.2 Guiding system: 
To keep the material straight 
Entrance and adjustable wheel: 2rolls 
Qty: 1 
3.3Main forming machine: 
Coil thickness:0.25-0.7mm  
motor type: 3 phase asynchronous motor  
Main motor power:4kw+3kw(normal speed), 
Approx.13groups roller including 
Roller : S45C with quenching treatment,Shafts  of rollers are tooled by grinding machine for two times to ensure the precision of final product. 

Shaft:Diameter of max shaft: ø70mm(hardening and tempering)


Transmission type:by one inch chain

Qty: 1 
3.4 Hydraulic cutting: 
Material of blade: Cr12Mov,HRC58-62 
Length measuring: Automatic encoder length measuring 
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes 
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.      
Power of motor:3kw      
3.5 Product support frame  
Size: L 3m x W0.5m jcxsteelrollformer.com

其他類似產品