產品資訊 - Step tile roof panel roll forming machine->Engineering machinery

登入

加入會員

求助

Botou Golden Integrity Roll Forming Machine Co.,Ltd

	Recommended Results

Step tile roof panel roll forming machine

產品分類 :

機械與設備->土木建設機械->其他->工程機械

Step tile roof panel roll forming machine

產品規格

Model No:	step tile

Country	CN
Minimum Order	1
Payment Term	L/C

產品描述

<h1 style="text-align:center;margin-left:0pt;text-indent:0pt;background:#FFFFFF;">
Step tile roof panel roll forming machine
</h1>

 


 


 


Pre-painted metal step tiles are produced by step tile roll forming machine from high quality colored coated galvanizedsheets most time apply as roofing on Villas or some residential buildings. 


There is only one but key difference between a metal glazed roof tile and a regular metal roof panel: Steps! Generally speaking, a regular metal roof panel with steps is called a metal glazed roof tile!The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously .


 




1.Photos of Machine: 
   

  


<img src="http://i.bosscdn.com/product/7f/9a/70/a97feb400c0d1cc758fe6c8284.jpg" title="step tile forming machine" alt="step tile forming machine" /> 


2.Technology parameters: 
The weight of machine is about3.1tons.The total dimension of machine:6800(L)*1200(W)*1500mm(H) 
2.1Manual decoiler: 
Capacity of uncoiler:5tons  
Expansion of segment:Manual  
Rotation of segment:Manual   
Number of segment:4 
Range of segment expansion:480-520mm  
Operation method:Manual   
2.2 Guiding system: 
To keep the material straight 
Entrance and adjustable wheel: 2rolls 
Qty: 1 
2.3Main forming machine: 
Coil thickness:0.3-0.7mm  
motor type: 3 phase asynchronous motor  
Main motor power:4kw+3kw(normal speed), 
Approx.16 groups roller including 
Roller : S45C with quenching treatment,Shafts  of rollers are tooled by grinding machine for two times to ensure the precision of final product. 

Shaft:Diameter of max shaft: ø70mm(hardening and tempering)


Transmission type:by one inch chain

2.4 Hydraulic cutting: 
Material of blade: Cr12Mov,HRC58-62 
Length measuring: Automatic encoder length measuring 
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes 
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.      
Power of motor:3kw      
2.5 Product support frame  
Size: L 3m x W0.5m jcxsteelrollformer.com

其他類似產品