產品資訊 - Black epoxy sanding ramp->handbag accessories

登入

加入會員

求助

Jiangmen Kasole Building Materials Co., LTD.

	Recommended Results

Black epoxy sanding ramp

產品分類 :

服飾及紡織->配件->包包配件

產品規格

Country	CN
Brand	Kasole
Payment Term	L/C

產品描述

Product Overview: 
Epoxy resin sanding and anti-slip floor is made of imported epoxy resin and curing agent and added with appropriate amount of filler. It can meet the requirements of anti-slip property on the ground by choosing different performance fillers. 
Application scope: 
Epoxy resin sanding and anti-slip floor is made of imported epoxy resin and curing agent and added with appropriate amount of filler. It can meet the requirements of anti-slip property on the ground by choosing different performance fillers. 
Product Features: 
1. Rough surface, no slip, no sand, good anti-slip function 
2, excellent anti-corrosion mold, acid, alkali, salt corrosion, non-toxic side effects 
3, excellent wear resistance, impact resistance, seamless, dustproof and waterproof, easy to clean 
4, excellent adhesion, rich colors, provide standard colors and customer set color 
Construction process: 
1, the original ground treatment: the construction of the ground to carry out a full grinding, repair, dust 
2, base coating: the primer material with roller or trowel 
3.Mid-coating: After the primer curing, grinding, dusting, and using a trowel to draw a good middle layer material 
4.Sanding: Mix the sand, no accumulated sand 
5. Top coat: Roll the top coat material onto the middle coat 
Conservation: 
1. The floor should be maintained for 7-10 days after construction is completed and put into use. During the maintenance period, water or other solutions should be prevented from invading the surface; 
2. Every employee who enters the workshop must be replaced with a coke-soled shoes; 
3. All hardware: can not get in the above; 
4. Pull the board to fully lift the pallet off the ground. When turning, pay special attention to the corner of the board. Do not scratch the ground. 
5. When cleaning the floor, use a soft mop with good water absorption or a wet or dry vacuum cleaner, which can be cleaned with clean water or detergent; 
6. If it is worn or scratched due to a long time of use, a small area can be repaired. If the area is large, it is recommended to re-roll once. 
7. Before the equipment enters the factory, lay a hard carton bottom on the floor to avoid scratching the ground during the transportation of equipment; 
8. Carts, cart wheels, please use rigid or elastic tires. 
kasole-paint.com

其他類似產品