產品資訊 - Imported chrome green metal surface hardener->handbag accessories

登入

加入會員

求助

Jiangmen Kasole Building Materials Co., LTD.

	Recommended Results

Imported chrome green metal surface hardener

產品分類 :

服飾及紡織->配件->包包配件

Imported chrome green metal surface hardener

產品規格

Model No:	KS-H140

Country	CN
Brand	Kasole
Packing	bags
Payment Term	L/C

產品描述

Product overview: 

Imports of chromium metal surface hardener is suitable for the warehouse, underground parking, machinery manufacturing enterprise workshop etc for the ground cannot rise sand dust, and can withstand all kinds of vehicles (such as car, forklift, cart, etc.) of roll-off, so these places of floor not only has general floor protection system level off,Smooth decorative effect, also need to have strong wear resistance and compression resistance. Therefore, the corundum wear-resistant floor is a floor system that professionally solves ground protection problems such as workshops, industrial and commercial warehouses, and underground parking lots for heavy machinery manufacturers.


Applicable place: 
1. The grounds of special places such as supermarkets, buildings, warehouses, auto showrooms, auto repair shops, and underground parking lots; 
2. The area with high mechanical performance requirements has a certain impact on machinery, electronics, electrical appliances, instruments, pharmaceuticals, textiles, clothing, food, tobacco and other corporate plant floors. 
3, industrial plants, production workshops, warehouses, logistics centers, garages, parking lots, supermarkets and other ground 
Product Features: 
1, impact resistance, heavy pressure, good mechanical properties; 
2, dust, mold, wear, hardness is good; 
3, resistance to heavy pressure, strong wear resistance, can not afford dust, enhance the ground oil resistance, anti-infiltration; 
4, the appearance of smooth, bright colors and diverse; 
5, easy to clean, easy to maintain. 
Basic requirements: 
1. The concrete strength of the grass-roots level should be above C25, the water-cement ratio should be controlled below 0.50, the concrete fall-out difference should be controlled within 70-100mm, and the concrete mixture should minimize segregation and control the bleeding. 
2. In order to ensure that the concrete mixture has sufficient fluidity and conducive to construction, it is recommended that concrete be added with proper additives. 
3. The concrete of the grass-roots level shall be poured and tamped with reference to the standard of the fine concrete. Note that the accurate size and the reduction of laitance production. 
4. The hardener surface is preferably constructed at the same time as the concrete structural layer. If the same leveling layer is to be applied at the same time, it is recommended that the leveling concrete should be fine stone concrete with a thickness of not less than 50mm, and consider deploying a telescopic reinforcement mesh. 
5. Pay special attention to the corners of the primary concrete construction block to ensure that the concrete is vibrated and compacted and additional strengthening treatment should be taken. 
Construction process: 
1.Surface treatment: using a mechanical rake equipped with a disc to evenly remove the laitance layer on the concrete surface; 
2. Distribute the material for the first time: Spread the prescribed amount of 2/3 hardened wear-resistant floor material evenly on the concrete surface of the initial setting stage, and then use a low-speed smoothing machine to perform the grinding treatment; 
3, Scratch ruler leveling: with 6 m scraping ruler, the hardened and wear-resistant material is evenly wiped horizontally and longitudinally and roughly leveled; 
4. Disperse the material for the second time: Dispense the specified amount of 1/3 color hardened and wear-resistant material evenly (on the surface of the first abrasion-resistant material), and polish again with a trowel; 
5, surface polishing: According to the hardening of the concrete, adjust the angle of the blade on the polishing machine, polishing the surface to ensure that the surface roughness and finish; 
6, base surface expansion: wear-resistant hardened floor within 4 to 6 hours after construction is completed, should be maintained on the surface to prevent the rapid evaporation of surface moisture to ensure the steady growth of wear-resistant material strength. 

kasole-paint.com

其他類似產品