產品資訊 - Red non-metallic floor hardener->handbag accessories

登入

加入會員

求助

Jiangmen Kasole Building Materials Co., LTD.

	Recommended Results

Red non-metallic floor hardener

產品分類 :

服飾及紡織->配件->包包配件

產品規格

Model No:	KS-H260

Country	CN
Brand	Kasole
Packing	bags
Payment Term	L/C

產品描述

Red non-metallic floor hardener is suitable for the industrial site, wharf, parking lot, commercial market, logistics warehouse and other ground decoration needs. It has the advantages of resisting pressure, reducing dust, hard surface, easy to clean and economical. 
 Red non-metallic floor hardener The performance characteristics of 
 1. Resistance to impact, pressure and mechanical performance; 
 2. Dustproof, mildew proof, abrasion resistance, good hardness; 
 3. Anti-stress, abrasion resistance, dust removal, enhanced surface oil resistance, anti-penetration; 
 4. The appearance is smooth and bright and colorful; 
 5. Convenient for cleaning and maintenance. 
 Use fixed number of year 
 Synchronize with concrete ground. 
 Basic requirements: 
 The concrete strength requirements of the concrete base are above C25, and the water-cement ratio is below 0.50, and the concrete slump should be controlled at 70-100mm, and the concrete mixing plant can reduce the segregation and control the bleeding. In order to ensure that the concrete mix is sufficiently liquid and conducive to construction, concrete admixture is recommended. The concrete should be poured and vibrated according to the standard of good concrete, and the size should be taken care of and the slurry will be reduced. Hardener surface layer with concrete structure construction at the same time, such as screed-coat construction at the same time, suggest using fine aggregate concrete, concrete leveling layer thickness of not less than 50 mm, and consider the configuration telescopic steel fabric pay special attention to the corner of the concrete block construction at the grass-roots level, ensure it concrete vibratory compaction, and additional strengthening treatment should be taken. 
 The construction technology 
 Surface treatment: the surface layer of the concrete shall be removed by the mechanical trowel of the plate. For the first time, the abrasion resistant floor material of zibo carborundum: 2/3 hardened and wear-resistant floor materials of the specified amount shall be uniformly distributed in the concrete surface of the initial solidification stage, and shall be polished and treated with a low speed smoothing machine; 
 Leveling: use 6 meters of scraper to evenly spread the abrasive materials along the horizontal and longitudinal direction. Second cloth material: dosage would stipulate a third color evenly cloth emery wear-resisting flooring materials (after the first grinding emery wear-resisting flooring material surface), again with flattening machine polishing processing; Surface polishing: according to the hardening condition of concrete, adjust the blade Angle of the polishing machine to ensure the surface smoothness and finish. Base level keeps expanding: emery wear-resisting flooring in the construction of 4 ~ 6 hours, after the completion of maintenance should be on the surface, to prevent surface water evaporation, sharply to ensure the steady growth of emery wear-resisting floor strength. kasole-paint.com

其他類似產品