產品資訊 - Canned Caps Injection Moulds->Dial Gauge

登入

加入會員

求助

3K Mold Co., Limited

	Recommended Results

Canned Caps Injection Moulds

產品分類 :

機械與設備->測量機->指示量表

產品規格

Model No:	M130179

Country	CN
Brand	3K MOLD
Packing	Wood box
Minimum Order	1
Payment Term	T/T

產品描述

<p class="MsoNormal">
At 3K Mold Co.,Limited,we have all of the equipment necessary to manufacture prototype and production molds in-house.<br />
<br />
We have the ability to make molds right in our factory. While other options are available, if a company chooses to go this route, they can know the mold was handled by 3K Mold exclusively from start to finish. An important part of this is that 3K Mold assumes full responsibility for the whole process. There is no finger pointing between the mold maker and the manufacturer. We are responsible for the whole process and have eliminated the option of shifting the blame to someone else. This means you will get a straight answer and a resolved issue without playing the arbitrator between two separate companies.<br />
<div>
<br />
</div>
<table border="0" cellpadding="0" cellspacing="0" width="693" style="width:520pt;" class="ke-zeroborder">
<tbody>
<tr>
<td height="20" class="xl66" width="212">
Project
Information
</td>
<td class="xl65" width="204">
</td>
<td class="xl65" width="277">
</td>
</tr>
<tr>
<td height="20" class="xl65">
 
</td>
<td class="xl65">
</td>
<td class="xl65">
</td>
</tr>
<tr>
<td rowspan="3" height="80" class="xl70">
Product Description
</td>
<td class="xl65">
Part Name
</td>
<td class="xl67">
Canned Caps Injection Moulds
</td>
</tr>
<tr>
<td height="20" class="xl65">
Part Material
</td>
<td class="xl67">
PP 
</td>
</tr>
<tr>
<td height="40" class="xl65">
Part Size(mm)
</td>
<td class="xl68" width="277">
122*117*15 <br />
Dia 131*23
</td>
</tr>
<tr>
<td rowspan="18" height="360" class="xl70">
Mould Description
</td>
<td class="xl65">
Cavity Insert Material
</td>
<td class="xl67">
Groditz 1.2343 HRC48-52
</td>
</tr>
<tr>
<td height="20" class="xl65">
Core Insert Material
</td>
<td class="xl67">
Groditz 1.2343 HRC48-52
</td>
</tr>
<tr>
<td height="20" class="xl65">
Slider Insert Material
</td>
<td class="xl67">
Groditz 1.2343 HRC48-53
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mould Cavities
</td>
<td class="xl67">
4+4
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mold parts Standard
</td>
<td class="xl67">
Hasco
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mold Size
</td>
<td class="xl67">
750*700*1100mm
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mold weight
</td>
<td class="xl67">
4250kG
</td>
</tr>
<tr>
<td height="20" class="xl65">
Lead time
</td>
<td class="xl67">
10 weeks
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mould Life Time (Shots)
</td>
<td class="xl69">
2,000,000
</td>
</tr>
<tr>
<td height="20" class="xl65">
Mould Type
</td>
<td class="xl67">
Export to Germany
</td>
</tr>
<tr>
<td height="20" class="xl65">
Runner Description
</td>
<td class="xl67">
Guenter Hot runner system
</td>
</tr>
<tr>
<td height="20" class="xl65">
Injection Gate Type
</td>
<td class="xl68" width="277">
Valve gate to part
</td>
</tr>
<tr>
<td height="20" class="xl65">
Ejection System
</td>
<td class="xl67">
Ejector pin
</td>
</tr>
<tr>
<td height="20" class="xl65">
Slide Qty.
</td>
<td class="xl67">
8
</td>
</tr>
<tr>
<td height="20" class="xl65">
Lifter Qty.
</td>
<td class="xl67">
8
</td>
</tr>
<tr>
<td height="20" class="xl65">
Cycle time
</td>
<td class="xl67">
11 S
</td>
</tr>
<tr>
<td height="20" class="xl65">
Surface finish
</td>
<td class="xl67">
VDI 3400-27
</td>
</tr>
<tr>
<td height="20" class="xl65">
Injection moulding machine
</td>
<td class="xl67">
280T
</td>
</tr>
</tbody>
</table>
</p>
<p class="MsoNormal">
<strong>High quality mold starts with a high quality design.</strong> 
</p>
<p class="MsoNormal">
Before mold machining, Engineering will provide a DFM report to analysis potential issue such as injection gate type and position, Mold layout, Ejector pins layout, draft analysis, thickness analysis, part warpage, sink marks and surface finish etc. If necessary, We also provide the mold flow analysis report to analysis the filing, pressure, weld line, airtrap, deflection etc. To discuss with customer and determine the final mold concept. After providing the 3D/2D for final approval.  <br />
 <br />
At 3K Mold Group, our design team consists of 15 skilled designers. They knew Hasco, DME and Custom standard etc Europe andAmericamold standard very well. Equipped with the latest hardware and software CAD, CAE,CAMto assist mold design and manufacturing. Rely on advanced equipment and 20 years experience in mold industry. 3K Mold Group has been built a diversified customer base from different industry.
</p>
<p class="MsoNormal">
<img src="http://i.bosscdn.com/product/9f/82/4b/7bcd2db5ccb9e5237fc407ba04.jpg@watermark=2&color=I0ZGRkZGRg%3D%3D&type=ZHJvaWRzYW5zZmFsbGJhY2s%3D&size=27&p=5&t=80&text=M2ttb2xkLmJvc3Nnb28uY29t" title="Mould Design" alt="Mould Design" />
</p>
<p>
<br />
</p>3kmold.com

其他類似產品