產品資訊 - Enter and Exit Station Stator Final Forming Machine->cutting and sealing machinery

登入

加入會員

求助

NingboNideMechanicalEquipmentCo.,Ltd.(11)

	Recommended Results

Enter and Exit Station Stator Final Forming Machine

產品分類 :

機械與設備->包裝機械->其他->封切機

Enter and Exit Station Stator Final Forming Machine

產品規格

Model No:	Z3XL1-150/160

Country	CN
Brand	Nide
Packing	wooden case package
Minimum Order	1
Payment Term	L/C,T/T

產品描述

This type of Enter and Exit Station Stator Final Forming Machine is used
for shaping stator coil after doing lacing, Driven by hydraulic system and controlled by the PLC, machine's inward and outward movable station is much
more convenient especially for the big stator. The forming process is perfectly done by
inner expansion, outer wrapping and overhanging pressing. Individual
guard teeth fully settles field wire and jump wire to ensure the
reliability of electrical leakage distance. It is of highly efficiency
and qualified forming. High technology, stable performance and
reasonable price.


 
I. Technical parameter:

<table align="left" border="1" cellpadding="0" cellspacing="0">
<tbody>
<tr class="firstRow">
<td valign="top" width="223">

Stator O.D

</td>
<td valign="top" width="312">

less than 160mm

</td>
</tr>
<tr>
<td valign="top" width="223">

Stator I.D

</td>
<td valign="top" width="312">

30~110mm

</td>
</tr>
<tr>
<td valign="top" width="223">

Stack height

</td>
<td valign="top" width="312">

20~150mm

</td>
</tr>
<tr>
<td valign="top" width="223">

Displacement of cylinder

</td>
<td valign="top" width="312">

20L

</td>
</tr>
<tr>
<td valign="top" width="223">

Power supply

</td>
<td valign="top" width="312">

1500 W

</td>
</tr>
<tr>
<td valign="top" width="223">

Voltage

</td>
<td valign="top" width="312">

380V/50/60Hz 

</td>
</tr>
<tr>
<td valign="top" width="223">

Weight

</td>
<td valign="top" width="312">

700KG

</td>
</tr>
<tr>
<td valign="top" width="223">

Dimension

</td>
<td valign="top" width="312">

L850*W1000*H2300mm

</td>
</tr>
</tbody>
</table>

 
 
 
 
 
 
 
 
 
 
 
 
 


 


 



II.  Main components


PLC: Mitsubishi(Produced in Dalian)


Oil pump: Jingyuan


Sensor: Autonics


Button/switch: Schneider


Other electric elements: Delixi/Schneider


 


III.  Machine main function and characteristic


1. This machine adopts whole hydraulic system and PCL program.


2. This machine can adjust the forming stack length by changing washer.


3.
Both slot paper and wedge should not be damaged or turned over. The
stator should not be deformation or stator lamination should not be
upward. There is no wire enamel broken.


4. Production capacity ≤13s/set (exclude loading/unloading time)


5. Primary qualification rate ≥99.5%, after rework, the rate ≥99.9%


6. This machine adopts safety grating protection system. Operator need to stand when operating.


7. Machine adopts two hands simultaneously start button to ensure safety.


8. Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%


9. His machine adopts safety grating protection system. Operator need to stand when operating.


l0.Machine adopts two hands simultaneously start button to ensure safety.


 


Required information for quotation: stator drawing before forming and after forming, including stator OD, stator ID, stator stack height, and end coil dimension.



<iframe src="https://www.youtube.com/embed/Upe8mLp2nqk" frameborder="0" height="315" width="560">
</iframe>

nide-auto.com

其他類似產品