產品資訊 - ASTMA789 790 Duplex steel seamless and welded tube->steel

登入

加入會員

求助

Junfun International Trade Co.,Ltd

	Recommended Results

ASTMA789 790 Duplex steel seamless and welded tube

產品分類 :

冶金礦產->鋼鐵類->鋼鐵

ASTMA789 790 Duplex steel seamless and welded tube

產品規格

Model No:	ASTMA789 790

Country	CN
Brand	JUNFUNSTEEL

產品描述

Introduction:
Called Duplex Pipe because of its mixed microstructure with about equal proportions of ferrite and austenite, duplex stainless steels are a family of grades, which range in corrosion performance depending on their alloy content. The chemical composition based on high contents of Cr and Mo, improves intergranular and pitting corrosion resistance, respectively. Additions of nitrogen can promote structural hardening by interstitial solid solution mechanism, which raises the yield strength and ultimate strength values without impairing toughness. Moreover, the two-phase microstructure guarantees higher resistance to pitting and stress corrosion cracking in comparison with conventional stainless steels.

Duplex is a stainless steel made from a mixture of austenite and ferrite phases. Like most austenitic stainless steels, duplex has a strong resistance to corrosion, similar to those of a Type 304 and 316.

Unlike similar steels, duplex also displays an improved resistance to localized corrosion, particularly pitting, crevice corrosion and stress corrosion cracking. And because duplex has a lower nickel and molybdenum content than other austenitic stainless steels, it can prove a more cost effective option due to a lower alloying content.

Due to its Ferritic qualities, duplex steel also shows very good resistance to stress corrosion cracking when compared to standard austenitic. In some cases, the strength of duplex steel can be up to double that of the most commonly used grades of stainless steel.

Duplex becomes brittle at extreme temperatures so its use is normally restricted to a maximum temperature of 300 degrees. Duplex also shows signs of embrittlement at -50 degrees.
Benefits:
Stronger than 300 series stainless steel which also brings weight advantages.
Cheaper than some stainless steels.
High resistance to pitting, crevice corrosion and stress corrosion cracking.
Higher heat conductivity and lower thermal expansion than austenitic steels.

Uses:
Pipes for production and transportation of oil and gas
Structural and mechanical components
Heat exchangers
Cooling pipes
Cargo vessels and containers
High strength wiring