產品資訊 - Multi Effect Falling Film Evaporator->food processing machine

登入

加入會員

求助

Geling(Shanghai)Environmental Technology Co.,ltd

	Recommended Results

Multi Effect Falling Film Evaporator

產品分類 :

食品飲料->食品加工->食品加工機械

產品規格

Model No:	GLJM-03-4000

Country	CN
Brand	Geling
Materials	SUS304/316L
Size	100-60000L/hr
Minimum Order	1 set
Payment Term	40%T/T as deposit,60% T/T before shipping

產品描述

Processing Flow
The material which entered into the balance tank will pumped to the pipeline of the preheater though flow meter and right angle valve, after heating to evaporating temperature, the material will flow to the distributor of 1st Effect Evaporator and distribute into every evaporating pipeline evenly, then flow down along the wall with membrane state, the material start to evaporate by steam which comes from steam manifold and heater jacket. this is the first evaporation. the secondary steam produced run to bottom of the chamber together with material, enter into 1st effect separator at tangent direction, then secondary steam and material separated when rotating, raw material enter into separator at top the 2nd effect evaporator by pump though discharge tube.
Finishing the second evaporation concentration as the same way of first evaporation. And then, send to the top of distributor of the 3rd Effect Evaporator for concentrating as the same method. Finally, the material will reach the required concentration and discharged by Outlet pump though bottom of separator, then do next process by discharge pump.
Saturation vapor enter into steam distribution cylinder from main branch( about 0.6-0.8kg per cm2 ),and then enter into 1st,2nd,3rd evaporator, condenser and relative four preheaters, for supply heat energy to the material. The secondary steam which separated from separator will be inhaled to condenser for cooling, the condensate will be pumped out by condensate pump as pre-treatment using or use in boiler.