產品資訊 - Inkjet Ink Eco Solvent Ink For Epson DX5/DX6 Printers->Digital Solvent inkjet printing material

登入

加入會員

求助

Digitex Printing Technologies Co. Ltd

	Recommended Results

Inkjet Ink Eco Solvent Ink For Epson DX5/DX6 Printers

產品分類 :

媒體及出版->印刷->數位噴墨印表機

Inkjet Ink Eco Solvent Ink For Epson DX5/DX6 Printers

產品規格

Country	0
Brand	DIGITEX
Color	C, M, Y, K, LC, LM, OR,GR,Cleaner
Packing	1L Bottle Bulk,1L Bottle Refillable,1L Pouch,220ml/440ml Cartridge(build-in Chips) then into Carton Box
Minimum Order	5L
Payment Term	Within 1-5 days against payment according to shipping methods.

產品描述

Eco Solvent Ink

Factory Direct Price for Epson DX4 DX5 DX6 Printhead Eco Solvent Ink
*Full solvent based pigment is available

Ink Type: ECO Solvent Pigment Ink
DIGITEX (INKPRO) Eco solvent Ink is specially engineered to optimum the printing performance on your printer instead of original ink. It offers same printing quality while zero difference in operation but faster in drying time, higher pigment density, boarder color gamut, greater scratch resistance, low cost and wider uncoated media support. With the ECO formula, INKPRO eco solvent ink is virtually odorless for maximum convenience and comfort does not require any special ventilation or environmental equipment. It's fully compatible to all Roland, Mimaki and Mutoh printers with outstanding performance. Three formulations are available to optimize your priters.

Color Available
Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Orange, Green, Cleaner

Compatible Printers
Printers with Epson DX4, DX5, DX6 printheads (Roland DX7), like EPSON, Roland, Muoth, Mimaki, Agfa Chinese OEM Printer, such as Allwin, Xenon, Galaxy, Smart, Skycolor. etc.

Technical Specifications
PHYSICAL PARAMETERS
Viscosity: 3-9cP (25 centigrade )
Surface Tension: 25-36 mN/m
Light fastness: 7 to 7/8

PRINTING CONDITIONS
-Available temperature: 20-30 centigrade
-Optimum temperature: 20-25 centigrade
-Humidity: 35 to 65% Rh (No condensation)
-Temperature change: about 10centigrade / hour or less
-Dust: Equivalent to normal office level
*We recommend that you preset the pre heater and pirnt heater temperature at 35centigrade(95 Fahrenheit). Since some media need to raise the heater temperature, test the
media and check the image quality in advance.

PRINTER TEMPERATURE SETTINGS
- Pre-heat: 35-40 centigrade
- Printing heat: 35-40 centigrade
- Dryer heat: 30-40 centigrade

STORAGE & TRANSPORTATION
Storage: 0 to 25centigrade (Average daily temperature). Be sure to keep in the airtight condition.
Transportation: -20 to 60centigrade. Avoid the condition lower than -20 centigrade and higher than 60 centigrade.

SHELF LIFE
12 months from the date of manufacture at room temperature (specified condition). Within one months after opening the package.

Ink Capacity
1000ml Bottle, 1L Pouch, customizable bulk package

*We supply 220ml and 440ml cartridges for most of the machines available on the market, such as Roland, Mimaki, Mutoh...,including chips and smart card in case needed.

Accessories
1. Solvent Cleaner
220ml/ 440ml Cartridge 1000ml Bottle

2. Bulk systems
continuous ink supply system, automatic ink refill system, a bulk feed ink system