產品資訊 - Soft density Silicone sponge ->rubber

登入

加入會員

求助

Suzhou Aotemake rubber products Co., ltd.

	Recommended Results

Soft density Silicone sponge

產品分類 :

化學->其他->橡膠

產品規格

Model No:	TEMAKE-01

Country	CN
Brand	TEMAKE
Materials	SILICONE
Size	ANY
Weight	ANY
Color	ANY
Packing	ANY
Minimum Order	1000M
Payment Term	TT

產品描述

Soft density Silicone sponge
Soft density silicone sponge is with high grade silicone rubber material and inimitable technique, with Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50C ~+200C protect and heat insulation for long term continuous use and -70C ~ +260C for intermittent Use on all kinds of machine.
Feature:
[Standard size(mm)] 500*500*(5-15) 600*600*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-15) 1000*2000*(5-15)
We can according to your request custom make any size.
If you are interested, please call TEL 0512-63935021 qq:1084393204
[Special size(mm)]Minimum length: No limitation Maximum length: No limitation, or in roll
Minimum width: No limitation maximum width: 1200 minimum thickness: 1.0 maximum
Thickness:50.0
[Product color] red, grey, natural, white, black or any other required color
[Application] heat transfer print equipment, electronics and electrics, machine and seal[Character]high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
Technical Index:
Style: Open cell
Surface: Double Fabric Impression
Tear strength: 55Kn/m
Press strength; 30Mpa
Elongation: 100%
Hardness: 8-50 Shore A
Temperature range: -50-220C continuously; -70C ~ +260C for intermittent use
Density: 0.55-0.9g/cm3
Flame resistance: 94V-0
Dielectric breakdown voltage: >3KV
Dielectric constant: 5.5 KHz
Tensile strength: 10-30psi
Volume resistance: 1. *1011 Ohm-m
Thermal conductivity: 0.1 W/M-K
Thick tolerance: ± 0.05mm~0.1mm