產品資訊 - Jaw Crusher/Stone Crusher/Rock Breaker->stone machine

登入

加入會員

求助

China Vipeak Mining Machinery

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Jaw Crusher/Stone Crusher/Rock Breaker

產品分類 :

機械與設備->礦山機械->其他->礦石機械

產品規格

Model No:	PE, PEX Series

Country	CN
Brand	Vipeak
Color	Any Color Is Available
Packing	Exporting Standard
Minimum Order	1 Set(s)
Payment Term	L/C, T/T

產品描述

Jaw Crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.

Main structure of Jaw Crusher:
Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting.

Working Principle of Jaw Crusher:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.

Characteristics of Jaw Crusher:
large crushing ratio, even granularity, simple structure, reliable operation, convenient maintenance, low cost

Max Feeding Size (mm):125, 210, 340, 425, 500, 630, 750, 850, 1020
Capacity (t): 5~16, 5~20,16~65,45~100,90~180,110~260,160~410,250~480, 350~800