產品資訊 - Ceramic tile locator/cross localization->construction materials

登入

加入會員

求助

Wenzhou is stablished plastic Co., LTD

	Recommended Results

Ceramic tile locator/cross localization

產品分類 :

建築及建材->建築材料

產品規格

Model No:	1.0MM-10.0MM

Country	CN
Brand	CHSG
Materials	PE
Size	1.0MM-10.0MM
Color	多种颜色可定做
Packing	包装袋或吊卡装
Minimum Order	1000
Payment Term	支付宝

產品描述

A bag of 100

1, the name

Ceramic tile, say again cross localization, foreigners call it cross plastic tile spacer, the plastic cross, is the translation of spacers, ceramic tile locator or plastic cross.

2 and materials

Market is comparatively mature products with PE material, color is white, the advantages of porcelain toughness, good tensile, non-toxic, impact resistance, resistance, NaiShiXing, no explosive.

3 and product use

Adjust ceramic tile ceramic tile aperture size, among the neat, beautiful stick to ceramic tile aperture, evenly between the agreement.

Ceramic tile laid, must stress seam, now have some so-called seamless ceramic tile, actually is a tricky. Ceramic tile seam, but not the specifications for processing, and most major is to heat bilges cold shrink WKT). Previously, perhaps everyone heard seamless steel tube. Now some of the ceramic tile of seamless, consumers need attention. Aside from physics, we decorate the perspective that is theoretically said no past, seamless steel tube inflation is integral 360 outward, so no cracks. But most in a relatively ceramic tile, enclosed space construction in metope, for example, generally about below and must be part of the wall and floor closed fixed, if the ceramic tile in construction, expansion of seamless processing, where its elongation? Obviously, to achieve a seamless ceramic tile ceramic tile of premise is the heat bilges cold shrink rate is zero. We know the possibility is zero. So forcefully seamless processing consequences? Ceramic tile is impossible because of the heat bilges cold shrink down on metope, the force might not greater than pushing metope. It is only one: ceramic tile arch.
4 and specifications

The specification is 1.0 mm, 1.5 mm, 2.0 mm, 2.5 m, 3 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 10mm mm, etc. 1.5 mm specification refers to 1.5 mm width.

Ceramic tile seam, the metope with 1-2mm for good, a few small brick (100x100mm), in order to beautiful, but need big seam.

Floor seam, besides the brick restoring ancient ways to keep large aperture (5mm - 10mm), a general with bricks, 3-10mm as well.

The following information is for reference only. According to the specific size selection sometimes hobbies and aesthetics.

1.0, 1.5 mm for seamless brick and marble tiles

2.0 mm for wall brick

2.5 mm, for small size ceramic tile 3.0 mm

4.0 mm, 5.0 mm, 6.0 for medium size tiles. Mm

8.0 for big size 10mm mm, tile and outdoor brick

5 and dosage

Ceramic tile positioning cross dosage: under normal circumstances, a brick with a cross, 5mm cross if such brick dried after almost can take down again, can generally use with three times, this can save some of the expenses, But 3mm 2mm and not the cross, otherwise easy brick, only retain such brick can win after thoroughly dry, so very hard commonly, had put to reuse is completed in sewing sight, Suggestions according to a brick with the principle of a cross.

6 and the seam

First, in order to adjust the size of the wall brick, grasp the overall appearance; error,

Second, in order to give wall brick, avoid sagging obligate expansion joints due to upper ranks wall brick wall brick wall brick of extrusion appear empty drum, fall off.

The company is located in transportation center, convenient transportation and inventory sufficient order after the circumstances, can deliver. Ensure product with the fastest speed at your hands.

The aim of our company is "strives for the survival by the quality, honesty and development".

One kilogram, jiangsu express cost five yuan.