產品資訊 - A4/A3 Cut Size Sheeter with automatic wrapping machine->Paper Machinery

登入

加入會員

求助

Lineomatic Graphic Industries

	Recommended Results

A4/A3 Cut Size Sheeter with automatic wrapping machine

產品分類 :

機械與設備->造紙及紙類加工機械->紙加工工廠->紙張機

A4/A3 Cut Size Sheeter with automatic wrapping machine

產品規格

Model No:	CSS

Country	IN
Brand	Line O matic
Minimum Order	1

產品描述

Line O Matic A4 A3 Cut Size Sheeter consisting of 3 unwinding reel station, each reel station is having 2 reel unwinding shaftless stand fitted with Electronic tension control, Decurling unit, Slitting Unit, Chopping Unit fitted with Syncro Cutting System, Conveyor Unit, Collating Unit, Robot Unit, Connecting Bridge between Cut Size Sheeter and ream wrapping machine with control penal with all electrical motors and standard accessories, ream wrapping machine with its control penal.

Production Capacity: 60 to 80 tones per day 24 hours depending upon the quality, gsm and paper reel width & number of reels being used

General Specification:

-Number of Pockets :Total 6
-Material :Unquoted Copier Paper
-A4 Sheet length accuracy :Approximately 0.5 to 1 mm
-A4 Sheet angle accuracy :Approximately 0.5 to 1 mm
-Maximum knife loading :400 gsm operating
-Maximum cutting width :1260 mm
-Trimming :Minimum 5 mm each side
-Reel / Paper Gsm :65 to 100 gsm
-Equipped with size :A4 / A3
-Slitting Width :210 mm per pocket (A4)
420 mm per pocket (A3)
-Cutting/Sheeting Length :297 mm
-Design Speed :200 mtrs/min
-Production Speed :150 to 200 mtrs/min depending upon quality and gsm of the paper
-Power Required : Approximately 80 Hp (440 valts, 3 phase, 50 cycle)

General Points:

1. Ream outlet from pocket coming on conveyor will be 90 degree right angle to main cut size sheeter looking from unwind stand.

2. Sheets counter facility equipped but allowable allowance in sheet count is +/- 5 sheets.

3. Suitable device for taking out trimmed waste by vacuum blower and dust removal from top
& bottom knives of slitter unit and chopping unit.

4. There is emergency stop and automatic pneumatic lock web holding device.

5. Necessary walkway base will be provided made of steel channel and sheet.

6. The equipment will be properly painted. Colour choice as per customer.