產品資訊 - silicon rubber for manual molding->silicone sealant

登入

加入會員

求助

Hong Ye Jie Technology Co.

	Recommended Results

silicon rubber for manual molding

產品分類 :

化學->其他->矽樹脂密封劑

產品規格

Model No:	HY528,HY540,HY570

Country	CN
Brand	Hong Ye
Materials	Silicon rubber
Weight	25kg,200kg/drum
Color	white/yellow/red/blue
Packing	in drums
Minimum Order	100kg
Payment Term	L/C at sight, T/T

產品描述

Silicon rubber for manual molding (Model code:HY528,HY540,HY570)

Applications for manual molding silicon rubber:
the manual molding silicon rubber is mainly applicable to manual mold desigh, PVCplastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

Features description for manual molding silicon rubber: the manual mold slicon rubber features with the resistance of deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
Silicon rubber for manual mold features description?
The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.

Silicon rubber for manual mold operations?
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)

Frequently asked questions for Silicon rubber for manual mold: What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.

minimum order:100kg
packaging:25kg/drm,200kg/drum
capacity:4000kg/day

其他類似產品