產品資訊 - Tpm2012 CNC High-Speed Drill->handbag accessories

登入

加入會員

求助

JinanSunriseCNCMachineCo.,Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Tpm2012 CNC High-Speed Drill

產品分類 :

服飾及紡織->配件->包包配件

產品規格

Model No:	TPM2012

Country	CN
Brand	Sunrise CNC
Packing	Wooden Cases
Minimum Order	1
Payment Term	L/C,T/T,D/P

產品描述

<div class="bsc-item">
Applicable Industry: Mainly used for drilling tube plate, clapboard, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, iron tower industries.
</div>
 
Product feature: 
1. The lathe consists of lathe bed, work table, gantry, slide carriage, power head, CNC system, cooling chips discharge system etc. 
2. The lathe works in mode of lathe bed and gantry being fixed and work table moving. 
3. The lathe bed and gantry are weld assembly, work table is iron casting, which was high temperature annealed before processing, was annealed again after half finished machining to remove stress, then finished machining so that ensure stable precision. 
4. The lathe has 3 numeric control axes; a heavy linear guide is equipped on the lathe bed. The work table can make longitudinal movement along the guide(X axis), the gantry cross beam has a linear guide too; the slide carriage can make lateral movement along the guide (Y axis). Sliders are equipped on the slide carriage, a guide on power head which can make vertical movement on the slide carriage. 
5. The power head spindle is precision spindle of Taiwan KENTURN / Taiwan Xutai, which is driven by special frequency conversion motor and can make stepless speed regulation according to needs. The spindle is BT50 taper hole. The drilling head, reamer or milling cutter can be installed by splice bar. The spindle box has a loose cutter cylinder (air and hydraulic pressure) for easily changing cutters. It also can equip with cutter inter-cooled splice bar to realize high speed cutting. 
6. The chip cleaner equipped at the back of work table can discharge chips automatically. The lathe use water cooling with the system of cooling liquid providing, recycling, circulating and filtrating. 
7. Numerical control uses FAGOR8055 system, with RS232 connector and color LED panel, Chinese interface. It can make spot / external PC workpiece input and be easily operated. 
8. Protective covers are equipped for X/Y axis guides and lead screw of the lathe. Iron sheet cover is for X axis, and organ-protective cover for Y axis. 
9. For ensuring the reliability of the lathe, the key components use high quality imported products. See the main spare parts list for details. 
 
<img src="http://i.bosscdn.com/product/93/3f/8f/514bbb9a5d156da63e8de37ce1.jpg" alt="" /> 
Specifications:
<div class="rich-text-table">
<table style="width:472.8500pt;">
<tbody>
<tr>
<td style="background-color:#f5f7fa;">
Parameter Name
</td>
<td style="background-color:#f5f7fa;">
Item
</td>
<td style="background-color:#f5f7fa;">
Specifications 
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Max. size
</td>
<td>
L X W
</td>
<td>
2000X1200mm
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Max thickness
</td>
<td>
 
</td>
<td>
250mm
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Work table 
</td>
<td>
Width of T slot
</td>
<td>
28/500mm
</td>
</tr>
<tr>
<td rowspan="7" style="background-color:#f5f7fa;">
Vertical slide type drill head
</td>
<td>
Quantity
</td>
<td>
1
</td>
</tr>
<tr>
<td>
Main spindle taper hole
</td>
<td>
BT50
</td>
</tr>
<tr>
<td rowspan="2">
Max drill diameter(common carbon steel)
</td>
<td>
φ40mm(carbide drill)
</td>
</tr>
<tr>
<td>
φ50mm(HSS twist drill)
</td>
</tr>
<tr>
<td>
Main spindle speed
</td>
<td>
30-2400r/min
</td>
</tr>
<tr>
<td>
Motor power of spindle 
</td>
<td>
22/33kW
</td>
</tr>
<tr>
<td>
Distance between spindle tip to work table
</td>
<td>
300-800mm
</td>
</tr>
<tr>
<td rowspan="3" style="background-color:#f5f7fa;">
(X axis) 
Gantry longitudinal move 
 
</td>
<td>
Max. stroke 
</td>
<td>
2000mm
</td>
</tr>
<tr>
<td>
Moving speed of X axis
</td>
<td>
0-8m/min
</td>
</tr>
<tr>
<td>
Servo motor power of X axis/torque
</td>
<td>
3kW/28.4Nm
</td>
</tr>
<tr>
<td rowspan="3" style="background-color:#f5f7fa;">
(Y axis) 
Power head transversal move 
 
</td>
<td>
Max stroke
</td>
<td>
2000mm
</td>
</tr>
<tr>
<td>
Moving speed of Y axis
</td>
<td>
0-8m/min
</td>
</tr>
<tr>
<td>
Servo motor power of Y axis/torque
</td>
<td>
3kW/28.4Nm
</td>
</tr>
<tr>
<td rowspan="3" style="background-color:#f5f7fa;">
(Z axis) 
Vertical slider feeding
</td>
<td>
Stroke of Z axis
</td>
<td>
500mm
</td>
</tr>
<tr>
<td>
Feeding speed of Z axis
</td>
<td>
0-5m/min
</td>
</tr>
<tr>
<td>
Servo motor power of Z axis/torque
</td>
<td>
3kW/28.4Nm
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Positioning accuracy 
</td>
<td>
X/Y axis
</td>
<td>
≤0.1mm/ Full length
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Repositioning accuracy
</td>
<td>
X/Y axis
</td>
<td>
≤0.05mm 
</td>
</tr>
<tr>
<td rowspan="2" style="background-color:#f5f7fa;">
Hydraulic system
</td>
<td>
Hydraulic pump pressure/flow rate
</td>
<td>
6.5MPa /25L/min
</td>
</tr>
<tr>
<td>
Hydraulic pump motor power
</td>
<td>
3kW
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Pneumatic system
</td>
<td>
Compressed air pressure
</td>
<td>
≥0.4MPa
</td>
</tr>
<tr>
<td rowspan="6" style="background-color:#f5f7fa;">
Chip cleaning and cooling  
</td>
<td>
Chip cleaner type 
</td>
<td>
Plate chain type
</td>
</tr>
<tr>
<td>
Chip cleaner no.
</td>
<td>
2 
</td>
</tr>
<tr>
<td>
Chip cleaning speed
</td>
<td>
1m/min
</td>
</tr>
<tr>
<td>
Chip cleaner motor power
</td>
<td>
0.75kW
</td>
</tr>
<tr>
<td>
Motor power of inner cooling water pump 
</td>
<td>
3kW
</td>
</tr>
<tr>
<td>
Motor power of Outer  cooling water pump
</td>
<td>
0.75kW
</td>
</tr>
<tr>
<td rowspan="3" style="background-color:#f5f7fa;">
Automatic lubricating system
</td>
<td>
Lubrication pressure
</td>
<td>
2MPa
</td>
</tr>
<tr>
<td>
Lubrication point oil injecting amount 
</td>
<td>
0.1mL
</td>
</tr>
<tr>
<td>
Lubrication period 
</td>
<td>
6-10min
</td>
</tr>
<tr>
<td rowspan="2" style="background-color:#f5f7fa;">
Electric system
</td>
<td>
CNC system
</td>
<td>
FAGOR8055
</td>
</tr>
<tr>
<td>
CNC axis NO.
</td>
<td>
4
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Whole power of motors
</td>
<td>
 
</td>
<td>
Approx. 48kW
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Overall size
</td>
<td>
LxWxH
</td>
<td>
Approx. 5800X5800X3600mm
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
Weight 
</td>
<td colspan="2">
Approx. 28t
</td>
</tr>
</tbody>
</table>
</div>
 
 
 
 
   
  Main Components List:
<div class="rich-text-table">
<table style="width:447.0000pt;">
<tbody>
<tr>
<td style="background-color:#f5f7fa;">
NO.
</td>
<td style="background-color:#f5f7fa;">
item 
</td>
<td style="background-color:#f5f7fa;">
model
</td>
<td style="background-color:#f5f7fa;">
Manufacturer 
</td>
</tr>
<tr>
<td colspan="4" style="background-color:#f5f7fa;">
Main electric components
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
1
</td>
<td>
CNC system
</td>
<td>
8055
</td>
<td>
Spain FAGOR
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
2
</td>
<td>
Servo motor
</td>
<td>
MGMA302P1G
</td>
<td rowspan="4">
Panasonic 
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
 
</td>
<td>
Servo driver 
</td>
<td>
MFDDTB32A
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
3
</td>
<td>
Servo motor
</td>
<td>
MGMA302P1H
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
 
</td>
<td>
Servo driver
</td>
<td>
MFDDTB32A
</td>
</tr>
<tr>
<td style="background-color:#f5f7fa;">
4
</td>
<td>
Variable frequency <span

其他類似產品