產品資訊 - Encoder->Toolholders For CNC Machines

登入

加入會員

求助

Wuxi Create Precision Machine Co., Ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

Encoder

產品分類 :

機械與設備->工具、刀具、模具->CNC工具用刀柄->CNC工具用刀柄

產品規格

Country	CN
Brand	CREATE

產品描述

Mechanism related

u The output cable of encoder and power cable can not be fixed together or putted in same tube. The output

u cable should also be far from the switchboard to avoid disturbing . The cable should be shielded.

u Careful check should be taken before starting the machine, the product instruction should be matched with

u the encoder model, wire connection should be correct , wrong connection will damage the internal circuit.

u Signal degradation factor should be considered when taking a long distance transmission The output mode

u should be with low output resistance and strong anti-disturbing capacity.

u The transmission distance for pulse signal is related with the following factors : frequency, output circuit, input circuit, transmission cable and transmitting frequency.

Electric related

u The output cable of encoder and power cable can not be fixed together or putted in same tube. The output cable should also be far from the switchboard to avoid disturbing . The cable should be shielded.

u Careful check should be taken before starting the machine, the product instruction should be matched with the encoder model, wire connection should be correct , wrong connection will damage the internal circuit.

u Signal degradation factor should be considered when taking a long distance transmission. The output mode

should be with low output resistance and strong anti-disturbing capacity.

u The transmission distance for pulse signal is related with the following factors : frequency, output circuit, input circuit, transmission cable and transmitting frequency.

Environment related

u The encoder is a precision apparatus, when use it , it should be far away from vibration source.

u The encoder is not designed with sealed structure, prevent water or oil etc. splashing on it. Use a protecthood if necessary.

u The environmental temperature and humidity should be in the operation range.

u Note: performance and service life of encoder will be affected seriously by improper