Cangzhou Bartech Construction Material Co., Ltd.

登入

加入會員

求助

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. Tapered Threading machine

Parameter for the tapered thread cutting machine:
Rebar Diameter Range: 12mm-40mm
Thread Length Range: 90mm
Rebar required Length: Longer or same as 300mm
Electricity: 380V, 50Hz
Motor Power: 3KW
Reducer Reduction Ratio: 1:29
Roller Rotated ...

2. Cold Pressing Machine

Pressing Machine is used to pressing cold pressing couplers to connect with the rebars.
Model:
LJY-32(16-32mm)
LJY-40(36-40mm)
Motor Power:
3KW
3KW
Max Oil pump Pressure
70MPa
70MPa
Clamps Tension
65Ton
80Ton
Oil Pipe Connector
M24*1. ...

3. Rebar Coupler Auto Thread Tapping Machine

GSJ-32 model rebar coupler auto thread tapping machine is mainly used for rebar couplers thread tapping with size of M32-M16.
This machine has Single-chip computer control, mechanical and hydraulic pressure drive. By the program control, it ...

4. Upsetting Rebar Coupler

Upset Parallel threaded coupler are suited to projects which required high volumes of couplers. They produce a full strength joint in the rebar connection. The ends of the bars to be joined are cut square and enlarged by cold forging to increase ...

5. Rebar Thread Rolling Machine

Rebar Thread Rolling Machine
Rolling technology for connecting rebar, easy operation, quick connection. The machine can threading rebar from Diameter 16mm to Diameter 40mm.

Rebar Threading Range: 16mm-40mm
Main Motor Power: 4KW
Electricity ...