Foshan Dunhe Plastics.Co.,Ltd. – 線上商品櫥窗

登入

加入會員

求助

Foshan Dunhe Plastics.Co.,Ltd.

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. PCTFE parts

PCTFE is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical ...

2. PFA injection parts

PFA its most unique features are a relatively low flow rate, greatly increased flex life, and enhanced resistance to environmental stress cracking. PFA is preferred when extended service is required in hostile environments involving chemical, ...

3. FEP injection parts

FEP is a copolymer of hexafluoropropylene and tetrafluoroethylene. It differs from the PTFE (polytetrafluoroethylene) resins in that it is melt-processible using conventional injection molding and screw extrusion techniques.

FEP is very similar ...

4. PTFE parts

TFE is used as a non stick coating for pans and other cookware. It is very non-reactive, partly because of the strength of carbonfluorine bonds, and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used ...

5. PEEK

Because of its robustness, PEEK is used to fabricate items used in demanding applications, including bearings, piston parts, pumps, compressor plate valves, and cable insulation. It is one of the few plastics compatible with ultra-high vacuum ...