CHIE HONG TECHNOLOGY CO.,LTD – 線上商品櫥窗

登入

加入會員

求助

CHIE HONG TECHNOLOGY CO.,LTD

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. Auto Pasteurizer Cooler / Warmer

The basic design is for working in low temperature pasteurizing,cooling and warming combination of all three.

- IN-FEED & THE DRAINAGE PIPING SYSTEM
The piping system is made of SUS304, invididual supply water control and drainage piping ...

2. Auto Can Filler & Sealer

Auto descending for closed type filling assures no deformation of the cans. Can be equipped with a number-stamping machine.

- UP-SLIDE OF FILLING DEVICE
The up-slide of filling device can stability for cans during high speed operation, ...

3. Auto Bottle Volumetric Filler & Aluminum Foil Capper

This machine is used for plastic bottle juice & milk filling, cap forming and sealing by heat.

- EXTERNAL FILLING BARREL
Filling tank, which is separate, is placed outside of the machine. The product through the buffer tank of machine flow ...

4. Auto Bottle Filler-Screw-Capper

Combin with Filler & Capper to mono-bloack is specially designed for glass bottle of non-carbonated beverage or mineral water.

- LARAGE CAPACITY
60 Overflow-Filling Valves, 15 Capping heads can handle filling 600cc-400BPM.

- TOUCH TYPE CONTROL -STATUS BLOCK SYSTEM
Can be operate control systems of this machine and each peripheral equipment, and display operating status of each control system on the liquid crystal display monitor.

- SELECTION & CAP SELECTOR-BLOWER
It design to use air transfer system for automatic continous transfer cap to screw-capper. Whole kind of cap can use this device.

- BOTTLE-MOUTH CENTERING BELL DEVICE
It can support and ensure filling bottle that the bottle-mouth can correct aim on filler. It hold bottle more stability and reduce the bottle-mouth and filler interfere resulted in spare parts consumption.

- BOTTLE LOADING & DISCHARGE
Bottle loading & discharge through star wheels secure the stable and accurate movement. The timing screw is able to be regulated to match bottle diameter size. The star wheel is easy to be assembled and adjusted for the fixed time & position.

- SEALSING HEADS
After the aluminium closure has been laid on top of each bottle by means of aluminium closure selector, the automatic capper will then lower down tightening up the aluminium closures together with its inner by using pressure block.Then, the pilferproof locking bank will be locked up by driving the pilferproof roller completely down to have the sealing operation come to and end.

- BACK-FLOW TANK & CIP SYSTEM
Be exhausting the air of bottle and extrhcting over-filling fluid to BST(Backflow Tank), then pumping the liquid from BST back to pre-process tank for re-process.

- AIR-BEVERAGE SEPARATING TYPE OVERFLOW FILLER
Made of stainless steel and sanitary material. All kinds of dirt are easily to accumulate in thread or spring, it does not adapt any parts of this hike. This filler can be disinfected thoroughly and then meet the standard of food sanitation.

5. Auto Bottle Rinser-Filler-Capper machine

Combin with Rinser-Filler-Capper to mono-back is specially designed for non-carbonated beverage.

- LARGE CAPACITY
With 50 Rinshing heads, 40 Overflow-Filling valves, 15 Capping heads, can handle hot filling 500c.c bottle at speed up the ...