買家頻道

首頁 | My Commerce

登入 | 加入會員 | 求助

寄送推薦信函

推薦信籃 (0)

買家頻道簡介

買家頻道

買家簡介

欲購買產品

Pallets, Racks, Custom Built Fabricated Items

欲購買產品之描述

Dear Sir /Madam,

Please arrange to quote for the following Machineries.

Requirement - 1

HYDRAULIC SWING BEAM AHEARING MACHINE
Sl. No.
Dscription
U.O.M
(Unit of Measurement)
Specifications
1
Cutting size
T x w (in MM)
6 x 2500
2
Shear Angle
Deg and Minute
1º 30'
3
Strokes
min-1
1≥16
4
Adjusting Range of Backgauge
mm
20 - 600
5
Throat Depth
mm
145
6
Main Motor Power
Kw
To Be Filled By the Supplier
7
Net Weight
Kg
To Be Filled By the Supplier
8
Overall Dimensions
mm
To Be Filled By the Supplier

Desired Features / Functions:

1.The frame should be of welded steel and has to be stress relieved by tempering.
2.Hydraulic Drive, return of knife beam has to be smooth and prompt by accumulator or nitrogen cylinder
3.The adjustment of the blades gap and the value of gap are to be indicated by the convenient method for fast blade gap adjustment.
4.Machine has to be equipped with lighting – alignment, so as to align the sheet when shearing.
5.There should be provision for adjusting the knife beam in stepless mode.
6.Protection fence to be provided to ensure operator safety.
7.There has to be display unit in front side of the machine to display Backgauge Value and Strokes per minute.

Other Specification:

1.Motor should be of standard make like Siemens / SEW / ABB.
2.Sealing parts to be of from VALQUA Jpan and / OR Fietz Germany.
3.Cylinders: Surface to be coated with chromium plated.
4.All Cylinder parts to be of BOSCH-RexROTH Germany.
5.Electrical Control System: preferably of Siemens / Omran.
6.Ball Screw for Backgauge: to be of any standard make THK / HIWIN (Linear Guideways etc.)
7.Hydraulic Oil Tank Capacity to be of 230 L Minimum.
8.Painting Shade: As per Your Standard.
9.Working Temperature: 0 to 40 deg C
10.Humidity: Relative humidity is lower than 90 %
11.Power: 3PH, 415V + / - 10 %, 50 Hz.
12.All standard accessories to be provided.
13.List of Customers in India to be provided

Requirement - 2

NC TYPE HYDRAULIC PRESS BRAKE
Sl. No.
Dscription
U.O.M
(Unit of Measurement)
Specifications
1
Nominal Force
KN
800
2
Length of Work Table
mm
3200
3
Number of Strokes in Idle
Min
≥10
4
Distance between uprights
mm
2600
5
Depth of Throat
mm
280
6
Ram Stroke
mm
100
7
Max. Operating Height
mm
360
8
Stroke Adjustment
mm
80
9
Main Motor Capacity
KW

10
Overall Dimension
mm

11
Net Weight
Kg

Quote with all your Standard Specification.

With Best Regards.

Ishwar Gavi
Venkateshwara Automats
Bangaolore

公司介紹

**********

公司基本資料

公司名稱:	**********
聯絡人:	Mr. Keshav / Mr. Ishwar Gavi
Email:	加入推薦信籃
電話:	**********
傳真:	**********
國家:	India