Jiangyin Tsinghua Foamplastic Co.,Ltd

Jiangyin Tsinghua Foamplastic Co.,Ltd – 線上商品櫥窗

登入

加入會員

求助

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. EPS CNC cutting machine

The cnc cutting machien is used for cutting EPS shape such as decoration volumes and flat siding sheet. After drawing input, the impulse signal will be sent to controller from PC and then drive the X-axis(EPS block conveyer belt) and Y-axis(cutting ...

2. EPS cutting machine

Three-direction cutting, horizontal, vertical and cross cutting
Max 50 cutting wires can be manually set in horizontal direction,
and max 10 cutting wires in vertical direction
One wire is used to cut to length
Minimum thickness to be cut ...

3. EPS block molding machine

1. Touch screen system
2. Action controlled by PLC, hydraulic, compressed air.
3. Single-door opening with energy saving
4. Steam inlet controlled by ball valve
5. The automatic material feed guns controlled by vacuum with high efficiency ...

4. EPS continous pre-expander

1. Repetitious expansion to get low density material
2. Square layout design with isolation layer
3. Stainless steel chamber
4. Easy to operate

5. EPS batch pre-expander

1. 5 Safety devices.
2. Pressure Reduce Valve from Japan.
3. HMI and PLC are from Taiwan,all the parameter can be set and revised in the screen.
4. weight control of raw material with dust separator
5. prevent temperature reduce
6. ...