買家頻道

首頁 | My Commerce

登入 | 加入會員 | 求助

寄送推薦信函

推薦信籃 (0)

買家頻道簡介

買家頻道

買家簡介

欲購買產品

Gear cutting machine

欲購買產品之描述

My customer needs Gear-Cutting machine. Please kindly send me
Quotation. Characteristics on the machine should be near following:
Maximum diameter of straight-tooth gears to be machined, mm 500
Maximum diameter of the workpiece accommodated, mm 900
Maximum length of the workpiece accommodated, mm 3000
Maximum mass of workpiece accommodated (taking into account mass of
fixturing elements), kg 4000
Maximum module of gears to be cut (not less than), mm:
- with hob 20
- with disk-type cutter 25
- with end-milling cutter 30
Maximum tooth helix angle of gear to be hobbed, deg: ± 45
Ranges of number of teeth to be cut 6…200
Maximum diameter of hob to be set, mm 300
Maximum length of hob slide travel, mm:
- longitudinal 2800
- radial 350
Ranges of spindle rotation frequency when machining, r.p.m.
- with hob slide 10…100
- with end-milling cutter *) 60…600
- with heavy-duty hob slide *) 5…50
Ranges of axial feed, mm/min 0,02…575
Ranges of radial feeds, mm/min 0,36…7,1
Maximum torque moment on spindle of the machine, kN.m 2,25
Type of current of supply mains Alternating, 3-phase
Rated frequency, Hz 50**
Rated voltage, V 380**
Power of primary motion drive (not less than), kW 20
Overall dimensions of the machine, mm:
- length 11770
- width 4070
- height 2580
Mass of the machine, kg 28,5

公司介紹

**********

公司基本資料

公司名稱:	**********
聯絡人:	Nick Klementyev
Email:	加入推薦信籃
電話:	**********
傳真:	**********
國家:	Russian Federation