產品資訊 - 3d panel machine->wire mesh machine

登入

加入會員

求助

wire mesh machine co.,ltd

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

3d panel machine

產品分類 :

機械與設備->金屬冶鍊及加工設備->煉鋼工廠及周邊設備->鐵絲網機械

產品規格

Country	0
Color	blue
Packing	plastice ,controller by wood packing
Minimum Order	1 set
Payment Term	30%T/T ,after 70% by T/T

產品描述

3D PANLE MACHINE
Characteristics:
It adopts PLC controlling system. It can insert, cut, and control the position of the wire mesh and the foamed plastic boards automatically, in order to produce the 3D panel. This production line is of high automatic manufacturing level, productive efficiency, low lack welding rate, stronger and more even solder joint strength, smooth quality of 3D panels and low cost.The following is the normal specification of the machine:
Truss wire: 1.8mm-2.8mm (We can make up to 3.0-3.5mm, but the price will be higher than normal type)
Mesh Wire Diameter: 1.8mm-2.8mm (We can make up to 3.0-3.5mm, but the price will be higher than normal type)
Wire Mesh Hole: 50mm*50mm
Panel length: 3000mm-6000mm

Panel width: 1200mm
EPS Board Thickness: 50mm-100mm (We can make up to 80-150mm, but the price will be higher than normal type)
Spacing between wire mesh and EPS Board: 10mm
Input Supply: AV380V 50HZ 75KVA
Air Source Equipment: 3m3/min, 0.6-08Mpa
Dimension: 13500*1800*1700mm
Machine weight: 4000kg