買家頻道

首頁 | My Commerce

登入 | 加入會員 | 求助

寄送推薦信函

推薦信籃 (0)

買家頻道簡介

買家頻道

買家簡介

欲購買產品

Gears, Pinions

欲購買產品之描述

We have following requirement for our Global Steel Phillipines(SPV-AMC) INC., Iligan city,Phillipines . Drawings are also attached for your ready reference
1. DRIVE GEAR 48.802" P.D. -2 NDP -94 TEETH 26" FACE -20 DEG. NPA INV. STUB CUT TEETH 10 DEG. R.H. HELIX ANGLE ~ TO MESH WITH 119886-B ON 38.568" CENTER DISTANCE - TOTAL BACKLASH - .023" TO 0.035" SPLIT EQUALLY BETWEEN MATING GEARS - PITCHLINE VELOCITY 7857 FPM MAX. 250 RPM MIN. (QTY: 1 PC.)

NOTE: SHAFT ASSEMBLY COMPLETE WITH GEAR, MK. "E" TO BE DYNAMICALLY BALANCED. GEAR TEETH TO BE AGMA QUALITY 10. TEETH TO BE FINISHED CUT WITH GEAR MOUNTED ON SHAFT.

MATERIAL : FORGED CASE CARBURISING 17NiCrMo6 STEEL (%C: 0.17, %Mn : 0.75, %Cr :0.95 ,%Ni :1.35, %Mo :0.20) CASE HARDENED TO 53-58 HRC

2. GEAR,TOP & DRIVE PINION, TOP MILL PINION 24.000 P.D. 2 NDP 47 TEETH 20" FACE 20 DEG. NPA INVOLVE STUB CUT TEETH - 10 DEG. L.H. HELIX ANGLE TO MESH WITH 11986-E 24.00" CENTER DISTANCE TOTAL BACKLASH 0.020" TO 0.032" SPLIT EQUALLY BETWEEN MATING GEARS - PITCHLINE VELOCITY 6476 FPM MAX. 324 RPM MIN. , (QTY: 1 PC)

MATERIAL : FORGED CASE CARBURISING 17NiCrMo6 STEEL (%C: 0.17, %Mn : 0.75, %Cr :0.95 ,%Ni :1.35, %Mo :0.20) CASE HARDENED TO 53-58 HRC

3. BOTTOM MILL PINION 24.000" P.D. 2 NDP 47 TEETH 20" FACE 20 DEG. NPA INVOLUTE STUB CUT TEETH - 10 DEG. R.H. HELIX ANGLE TO MESH WITH 11986-B ON 24.000" CENTER DISTANCE TOTAL BACKLASH 0.020" TO 0.032" SPLIT EQUALLY BETWEEN MATING GEARS PITCHLINE VELOCITY 6476 FPM MAX. 324 RPM MIN.( QTY 1 PC.)

MATERIAL : FORGED CASE CARBURISING 17NiCrMo6 STEEL (%C: 0.17, %Mn : 0.75, %Cr :0.95 ,%Ni :1.35, %Mo :0.20) CASE HARDENED TO 53-58 HRC

You are requested to send your offer at the earliest for the above as per above requirement with complete technical details and quoting basic price, taxes etc.

Best Regards,

公司介紹

**********

公司基本資料

公司名稱:	**********
聯絡人:	Arun Sharma
Email:	加入推薦信籃
電話:	**********
傳真:	**********
國家:	India