買家頻道

首頁 | My Commerce

登入 | 加入會員 | 求助

寄送推薦信函

推薦信籃 (0)

買家頻道簡介

買家頻道

買家簡介

欲購買產品

FLAT STEEL, STAINLESS STEEL SCRAP, HOT ROLL COILS , COLD ROLL COILS , HOL ROLL BILLETS, BABY COILS , GALVANIZED PREPAINTED SHEET

欲購買產品之描述

Attn: Export Department

Sub: Import Stainless Steel and Steel Scrape

Dear Sir,

We will like to present ourselves as a Company registered with the Controller of Import, and Export, Ministry of Commerce and Industries, Government of Pakistan having the Membership of Pakistan most reputed and Influential Associations.

We are working in the Below Items and their details are as follows:

Now we are giving you the details of items in which we are dealing on regular basis.

STAINLESS STEEL

1) PRIME QUALITY HOT ROLLED BILLETS AS PER ASTM 615 GRADE 60
SIZE 100 X 100 LENGTH = 6 METER AS PER STANDERD LENGTH
SPECIFICATION IS AS FOLLOWS,

C: 0.25 – 0.30%
Mn: 1.25 – 1.30%
Si: 0.15 – 0.30%
S: 0.045 % Max.
P: 0.045 % Max.
Cu: 0.50 % Max.
CR: 0.25 % Max.
Ni: 0.25 % Max.
Cr + Ni: 0.45 % Max.
V: 0.020 % Min

2) STAINLESS STEEL SHEET OR COIL IN 2ND CHOICE MATERIAL,
STAINLESS STEEL COIL TYPE 302/304 2B/BA FINISH 2nd CHOICE,
THICKNESS FROM 0.3MM TO 1.00MM, WIDTH 600MM AND UP ,COIL WEIGHT 1MT
AND UP, ANY AVAILABLE QUANTITY

3) STAINLESS STEEL CIRCLE TYPE 201/302/304 2nd CHOICE, THICKNESS 20 MICRO,
SIZE=7.5", 8.5", 9.5", 15",17",19",21"and 23"

4) STAINLESS STEEL COIL TYPE 30 ONLY BA FINISH 2nd CHOICE, THICKNESS: 0.3MM TO 0.6MM, COIL WIDTH: 600MM AND UP, COIL WEIGHT 1M/T AND UP ANY AVAILABLE QUANTITY

5) G.P/ G.I SHEETS/ COILS BRIGHT SPANGLED, SOFT COMMERCIAL QUALITY.
THICKNESS 0.7MM AND LIGHTER: 600MM AND WIDER , PRIME OR SECONDARY
QUALITY.

6) CR/HR/COLOUR COATED COILS/SHEETS. THICKNESS 0.7MM AND LIGHTER.
WIDTHS:600MM and wider. Secondary choice.

7) S.S/HR PLATES THICKNESS 4MM * 25MM. WIDTHS: 1000 * 2000, 1250 * 2500MM, 1500 * 3000MM. ANY AVAILABLE QUANTITY

8) SECONDARY Electrolyte TIN PLATE W/ W BRIGHT FINISH DR TEMPERS COATING 0.25 LBS AND BETTER THICKNESS BW 60-107 SIZE 20 * 28 INCH AND LARGER (T1 To T5) FREE OF SCROLL EDGES, BLUE, BLACK PLATE PINHOLES ETC.

9) ETP W/ W SHEET IN COILS BW 65-107 LBS AND WIDER SOFT TEMPERS, BRIGHT.

10) ETP PUP COILS BW 65/107 TEMPER T1-T5 WIDTH 20" AND WIDER COILS WEIGHT
1000 LBS AND HEAVIER TIN COATING 0.20 LBS AND BETTER.

11) CR SHEETS/COILS, COLOUR COATED/GP COILS/GI/ALUMINIZED SHEETS/COILS 2nd CHOICE SOFT COMMERCIAL QUALITY THICKNESS 0.25 TO 0.6MM.

12) COLD ROLLEED STEEL PLATE THICKNESS 12MM TO 50MM SIZE. 2M * 8M.

13) 2nd CHOICE CR STEEL SHEET IN COIL, SOFT COMMERCIAL QUALITY FULL RANGE. THICKNESS: 0.3MM TO 2.99MM, 60% 1MM & LIGHTER, COIL WIDTH: 600 MM & WIDER, COIL WEIGHT: 1 M/T AND UP.

14) EG(Electro Galvanized) SHEET IN COIL NON-FINGER PRINT BASIS, THICKNESS 0.3MM TO 0.6MM,COIL WIDTH 800MM & UP,COIL WEIGHT 3 M/T AND Up.

15) PREPRINTED COIL ON GALVANIZED BASIS. THICKNESS 0.3MM to 0.6MM,
COIL WIDTH 800MM & UP, COIL WEIGHT 3 M/T & UP, SOFT COMMERCIAL QUALITY.

16) PRIME QUALITY HOT ROLLED COIL, SOFT COMMERCIAL QUALITY, DRY OR PICKLED AND OILED, THICKNESS 1.8MM TO 8.00MM COIL WIDTH 800MM & UP,
COIL WEIGHT 8 M/t AND UP.

17) PRIME QUALITY COLD ROLLED STEEL SHEET IN COIL, SOFT COMMERCIAL
QUALITY, THICKNESS 0.5MM ONLY, COIL WIDTH 1000MM & UP, COIL WEIGHT 8 M/t & UP.

18) ANY KIND OF BABY COIL IN 2nd CHOICE MATERIAL IN CR/HR/GP & EG,
COIL WIDTH 600MM & UP, COIL WEIGHT 500 KG & UP, SOFT COMMERCIAL QUALITY.

19) CD SHEET MIX OR ASSORTED AS PER MILL ACCUMULATION.

20) HIGH CARBON STEEL WIRE ROD, DIAMETER 5.50MM OF THE FOLLOWING
SPECIFICATION:
JIS 3506 G
62B Carbon Contents 0.62% +/- 0.02
67B " " 0.67%
72B " " 0.72%

21) PRIME QUALITY OR EXCESS PRIME OR PRIME OVER ROLLED TMBP COIL,
THICKNESS 0.17MM TO 0.30MM, WIDTH 800MM AND UP, COIL WEIGHT 3 M/T AND
UP, SOFT COMMERCIAL QUAIITY IN ANY AVAILABLE QUANTITY ALSO IF
SECOND CHOICE OR 3RD CHOICE MATERIAL AVAILABLE AT YOUR END .

QUANTITY REQUIRED 1000 MT PER MONTH

INSTEAD OF ABOVE LISTING, ALL OTHER ITEMS IN WHICH WE ARE WORKING AND WE MENTIONES IN OUR LIST, WE ARE WAITING ALL THE INQUIRES ACCORDING TO AVAILBILITY FROM EXPORTER’S END & TIME TO TIME, AS PER OUR IMPORTER’S REQUIREMENTS, WE WILL CONTACT OUR EXPORTER,S FOR OUR REQUIRED ITEMS.
WE HOPE TO RECEIVE FAVORABLE REPLY FROM YOUR SIDE WITH DETAILS OF SPECIFICATIONS OF MATERIAL & PRICE PMT C&F KARACHI PAKISTAN INCLUDING OUR 2% INDENTING COMMISION.

WAITING YOUR REPLY.

BEST REGARDS,

ADNAN RAIS
METAL LEADS
Suite # 32 1st Floor Sadiq Plaza
69 The Mall Lahore, Pakistan
Tel 0092-42-637 5828
Fax 0092-42-630 8560
E- Mail metallead@brain.net.pk
E:Mail metalbez@yahoo.com
Msn: metalleads@hotmail.com

公司介紹

**********

公司基本資料

公司名稱:	**********
聯絡人:	ADNAN RAIS
Email:	加入推薦信籃
電話:	**********
傳真:	**********
國家:	PK