changzhou yunfan bearing co.,ltd.

登入

加入會員

求助

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共9 筆產品

選取全部

全部取消

1. Needle Bearings

YFB needle bearings produce both inch&metric sizes: machined type needle bearing,track rolllers,combined needle bearings,thrust needle bearings,drawn cup needle bearing,and non-standared bearings.almost about 2000 different types.

2. Needle Clutches

YFB drawn cup needle clutches HF, HFZ series is composed of thin wall punched outer ring and plastic retainer. There is a clamping slope which holds the needles tightly on the inradius surface of the alloy steel punched out ring . the abrasion ...

3. Inner Rings

The inner rings of IR series is quenched and made with high precision. The dimensional tolerance and the geometric precision of the standard grade inner ring is in compliance with PO grade. In using YFB needle roller bearings, the selection ...

4. Combined Radial/Thrust Bearings

YFB produce the following combined radial/thrust bearings inclued:NKIA,NKIB,NX,NKX,NKXR,RAX700,RAXF700,RAX400,RAX500,RAXPZ400,RAXZ500

Needle and ratainer assenbly,needle bearing and drawn cup needle roller bearings are all moving tip bearings.The ...

5. Yoke Type Track Rollers

YFB yoke type track rollers can provide the following series:STO,RSTO,RNA22...2RS,NA22...2RS,NATR,NATR...PP,NATV,NATV...PP,NUTR,CRY,etc.

YFB yoke type track rollers with thick wall outer ring can roll directly on the tray under heavy load. ...

6. Stud type track rollers

YFB produces a full line of Track Rollers from 1/2 to 7 inch outside diameter sizes.

YFB stud type track rollers is composed of a stud used as the tray of a group of rollers and a thick wall outer ring. The shoulder of the stud and the ...

7. Needle & Cage Assembly

Needle & Cage Assembly : steel cage , plastic cage

YFB Connecting rod supporting Needle & cage assembly is applicable to the medium and small size diesels.The needle bearings , due to its special operational conditions , must bear the sho ...

8. Combined Radial/Thrust Bearings

9. Drawn Cup Needle Bearings

YFB drawn cup needle bearings is formed with thin steel plate through precision punching with very sectional height and big load capacity. This kind of bearings are especially applicable to the big quantity production with economic demands.

...