Ningbo Jinfeng Welding and Cutting Co., Ltd.

登入

加入會員

求助

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共10 筆產品

選取全部

全部取消

1. Hydraulic rollover stand

Hydraulic rollover stand
90 degree and 45 degree rollover stand adopts hydraulic throttle synchronizing rollover and mechanical position limitation, each group of rollover stand being set on basis of 40L/Min pump capability
Rollover angle: ...

2. cutting tip

All the cutting tip in different style, like ANME,PNME,6290,1-101,102,106 ECT.

3. YJZ-60 H-beam steel hydraulic straightening machine

H-beam steel hydraulic straightening machine is applicable to straighten H type steel or H beam steel wing plate when is on process of the welding and heating brings on the bend. This machine is used easily with high speed. The straightening ...

4. casing style plasma cutting machine

PSG series case style plasma cutting machine is designed for cutting plate. It has high-speed cutting function. The surface cutting is good. And it is equipped with bottom drawer style smoking management. The rate of the cutting achieve to 18m/min.
...

5. CNC palsma cutting machine

Features:
1) Rail span: 3 ~ 7 meters
2) Rail length: cutting effective length plus 2 meters
3) Torch: Max 4 torches
4) CNC controller: Fagor, Hypertherm, Burny

6. CNC pipe cutting machine

Features:
1) Cutting pipe diameter: 60 - 600mm
2) Workpiece length: <6,500mm
3) Workpiece ovality: <2%
4) Cutting speed: 100 - 750mm/min
5) Traveling speed: 100 - 5,000mm/min
6) Swing angle of cutting torch: <45 degrees
7) Number ...

7. CNC (high definition) plasma cutting machine

Now the plasma cutting machine is becoming more popular. The using of conventional plasma cutting technology is limited by its cutting length. For this redesign the previous versions and get the PG series CNC plasma Cutting Machine. It has the ...

8. MZG-2X1000 H beam gantry submerged arc welding machine

This machine is combined of auto-moving gantry, auto submerged arc welder, solder recycling system, guiding arc device etc. Using frequency variation can adjust the speed of welding moving. Using electric circuit control can get the result of ...

9. CNC Gantry Submerged ARC Welding Machine

HG series CNC Gantry Submerged ARC welding machine is the special welding equipment designed by us for the automobile reforming industry and H beam production industry. Because the machine has the technical of horizontal fillet welding and welding ...

10. portable cutting machine

This machine employing medium-pressure fuel gas and high-pressure oxygen to cut the plate which thickness is more than 8mm. It mainly be used for straight-line cutting, and also can be used for circle cutting with diameter more than 200mm, Bevel ...