詠詮機械股份有限公司 – 線上商品櫥窗

登入

加入會員

求助

詠詮機械股份有限公司

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共5 筆產品

選取全部

全部取消

1. 紗布機

1. Motor: 1 HP, single phase.
2. Oscilation: 75 oscillations per minute.
All spindles have thread end for quick changes
. Storage rack for Spindles and Table inserts
. Precision ball-bearings on main spindle support
. Rigid and stable heavy duty cast iron base
. Built in dust collection chute
. Heavy duty 1 piece welded steel construction stand

2. Benchdogs

Provide a stop to secure the workpiece from moving or sliding when drilling, cutting, gluing, or hand planning.
Round bench dogs are 3/4”in diameter and constructed of solid brass. Clamping face is 1-1/4”x 11/16”
Square dogs are 3/4”x 5/8”across, and 6-3/4”long, brass face is 1 x 5/8”
Both models have spring detents to hold the dog in place.

3. 裁板器

1. Clamps vertically or horizontally for perfect miter joints.
2. Tilts from 0 to 90 degrees, rotates 360 degrees, 4" jaw opening.
3. 5 holes in the base for mounting to work bench.
4.Vertical miter attachment is also available.

4. 成型刨木

Maximum planing width: 7” (178 mm)
Maximum molding width: 6 3/4” (171 mm)
Maximum thickness of stock: 8” (203 mm)
Minimum thickness of stock: 1/4” (6 mm)
Minimum length of stock: 8” (203 mm)
Maximum depth of cut (planing): 1/8” (3 mm)
Maximum depth of cut (molding): 3/4” (19 mm)
Number of knives: 2
Cutter head speed: 7000 RPM
Feed speeds (variable): 3 - 20 FPM (0.9 - 6.1 MPM)
Overall dimensions: (l x w x h) 32” x 27 1/2” x 51”
(813 x 699 x 1295 mm)

5. 圓鋸機

Motor / with brake: 2HP * 220V * 60HZ*1PH* 2P (3420RPM)
3HP * 220V * 60HZ*3PH* 2P (3420RPM)
Arbor: 5/8” w/ 1” bushing.
Blade: 12” blade 1” bore , 10” blade 5/8” bore.
Max. depth cut at 90 degree: 3”(76mm) for 12” blade. 2”(50mm) for10” blade.
Max. bevel cut depth at 45 degree: 2-1/4”(57mm) for 12” blade.
Crosscut Capacity: 14-1/8” (360 mm) max. at 3” (76mm) cut depth.
16” (407mm) max. at 1” cut depth
Rip cut Capacity: 26-3/8” (670mm)
Dado Capacity: 1-1/4” (31mm)
Bevel positive stops: 0, 45, 90 degree
Miter positive stops: 90 degree, 45 degree Left and Right.