如電實業股份有限公司 – 線上商品櫥窗

登入

加入會員

求助

如電實業股份有限公司

回首頁

公司簡介

產品櫥窗

影音視聽

寄出詢問函

聯絡我們

	Recommended Results

產品型錄

共10 筆產品

選取全部

全部取消

1. Stainless Steel & Carbon Steel Flanges

STAINLESS STEEL & CARBON STEEL FLANGES:

STANDARD: ANSI, BS, DIN, JIS, UNI, OEM, ODM
TYPE: WELDING NECK, SLIP-ON, THREADED, LAP JOINT, BLIND, SOCKET TYPE
PRODUCING METHOD: INVESTMENT CASTING, FORGED.
***OEM/ ODM FLANGES ACCORDING TO YOUR ...

2. TANK BOTTOM BALL VALVE, HIGH MOUTING PAD

3-PC TANK BOTTOM VALVE:
*FULL CAVITY FILLED SEATS, FULL PORT.
<< ONE SIDE TANK BOTTOM END; ONE SIDE CLAMP/ BUTT WELD END >>
*1"~2" 1000PSI/ 63BAR, 3"~4" 800PSI/ 40BAR.
*IMPROVE FLOW & ELIMINATE POOLING.
*DIREC ...

3. SANITARY 3-WAY BALL VALVE 1000PSI, DIRECT MOUNTING PAD

SANITARY 3-WAY BALL VALVE:
* 1/2 ~ 2": 1000PSI/63BAR; 2.1/2 ~ 4": 800PSI/ 40BAR,
* CLAMP END: 3A STANDARD; BUTT WELD END,
* L PORT, T PORT, X PORT (OPTION)
* DIRECT MOUNTING PAD FOR ACTUATOR USE
* SQUARE STEM
### FULL CAVITY ...

4. 3-PC SANITARY BALL VALVE FULL CAVITY SEATS

3-PC OUTSIDE POLISHED BALL VALVE:

FULL PORT; OUTSIDE POLISH; INSIDE POLISH.
1/2"~2": 1000PSI/PN63; 2-1/2"~3" 800PSI/PN40.

END: CLAMP END 3A STANDARD; BUTT WELD END.

OPTION: RJT MALE END; DRAIN HOLE DESIGN
<<< ...

5. Sanitary Butterfly Valve

SANITARY USED BUTTERFLY VALVE:
*BUTT WELD/ CLAMP/ MALE END
*STANDARD: 3A *FORGED BODY
*LOW TORQUE
*DISC: FULL MACHINED, HIGH POLISHED
*HANDLE: NYLON RE-FORCED HANDLE; SS HANDLE GRIPPER;
PULL/ PRESS TYPE; OPTIONS 2~12 ...

6. Sanitary Fitting

SANITARY FITTINGS, UNIONS, FERRULES, CLAMPS

Inox-Tek SPECIALIZES IN FULL RANGE OF HIGH QUALITY HYGIENIC
STAINLESS STEEL FLUIDS FITTINGS. OUR PRODUCTS INCLUDE
3A,IDF,RJT,DIN 11851 AND SMS SANITARY FITTINGS FROM 1" TO 10".
BESIDES,WE ALSO OFFER SPECIAL PRODUCTS MANUFACTURED
ACC.TO YOUR NEED

7. 2-PC BALL VALVE FLANGED END DIN PN16/ PN40

2-PIECE FLANGED END DIRECT MOUNTING PAD BALL VALVE
* Body: DIN 1.4408, 1.4308, 1.0619
* Blow-out proof stem, lever operated
* Trim in AISI 316
* Seats in PTFE
* Flange: DIN 2633/PN16; DIN1635 PN40
* Face to face: DIN 3202 F4
* Anti-static ...

8. 3-PC BALL VALVE DIRECT MOUNTING PAD

3-PIECE STAINLESS/CARBON STEEL MOUNTING PAD BALL VALVE
* Pipe thread in accordance with ANSI B2.1, BS 21, DIN 259/2999
* Blow-out proof stem/Full port
* Investment casting body & cap
* ISO 5211 DIRECT MOUNTING PAD
* Material: ASTM-A351-CF8M/ ...

9. BALL

OUR PRODUCTS ARE MADE FOR STAINLESS STEEL ANSI 316,304,
1.4408, 1.4301,1.4401 FROM INNER DIAMETER 9MM TO 250MM.
ACCORDING CUSTOMERS' DRAWING AS FLOATING & TRUNNION TYPE
WE ADOPT THE BALL SPHERE FROM BAR STOCK. INVESTMENT
CASTING CENTRIFUGAL CASTING AND SAND CASTINGS.

10. GATE/CLOBE/CHECK

Y-TYPE STRAINER CLASS 150
* FULL PORT FLANGE END
* Steel Valve, ANSI B16.34
* Face to Face, ANSI B16.10
* End Flanges, ANSI B16.5
* Material: ASTM-A351-CF8M, ASTM-A216-WCB, CAST IRON
* SIZE: 1/2"--12"