Features: 1) Inserts 2) Plastic mold guide pins and bushings 3) Rectangular Ejector Pins 4) Sleeves 5) Sprue bushings and locating rings
We have accumulated production experience and technologies for all kind of our mold component and accessories, and have constantly developed innovative and higher-quality products.
1) These components adopt imported top-grade heat mold steel, and the taper holesare processed by precise grinding, has good ability for mold unloading. 2) They can be made into all kinds of shapes and distributary structures accordingto specific
STANDARD ACCESSORIES NSK four-way high speed air turbine H.P.,2sets NSK four-way low speed air motor H.P.,1 set Three way springe,1 piece for cold and hot each Automatic cup filler Water suction and saliva ejector,1 set each Operation light X-
PVC modified material ,with a good figuration function, diameter 6mm & 6.5mm, long 140-150mm, transparent or white. Smooth surface, elastic tip, for single use.
Specifications: 1) Mould dimensions: 900 x 420 x 345mm 2) Mould material: 838H (LKM) 3) Mould type: family mould, 4 cavities (2+2) 4) Ejector type: stripper plate 5) Part material: PC
STANDARD ACCESSORIES ◆ Assistant controlled system ◆ NSK Four way high speed H.P,2sets ◆ NSK four way Low-speed air motor H.P,1set ◆ Ultrasonic Scaler,1set ◆ 3 way Syringe(one for hot and one for cold),2pcs ◆ Water Suction and
Screw Diameter:65,70,75,83mm Screw L/D Ratio:23.1,21.4,20,18.1 Theoretical Shot Volume:1111,1288,1479,1810(cm3) Shot Weight:1010,1170,1340,1647g Injection Pressure:208,179,156,127Mpa Injection Rate:283,328,376,461/s Plasticzing capacity:45,52,6
SI011C-R is one rear-side CF reader slot, which provides a convenient & easy way application of Serial ATA to Parallel ATA mode Compact Flash Device. Feature - Standard ATA Serial ATA to Parallel ATA device - One Compact Flash socket w/ejec
1.Right or Left version 2. 1pc per pack 3. Power supply: standard 12V AC(on request: 12VDC, 24 AC or DC) 4. Brass latch 5. Steel ejector incorporated into the latch 6.Supplied with adjustable heigh striker, with self-lubricating
STANDARD ACCESSORIES ◆ Air-lock balance arm system ◆ NSK Four way high speed H.P,1set ◆ NSK four way Low-speed air motor H.P,1set ◆ 3 way Syringe(for cold),1pc ◆ Saliva Ejector,1set ◆ Built-out Water purified System ◆ Opera
Screw Diameter:30,35,40mm Screw L/D Ratio:22,22,22 Theoretical Shot Volume:117,159,207 (cm3) Shot Weight:106,144,189g Injection Pressure:252,185,142Mpa Injection Rate:63,86,112g/s Plasticzing capacity:9.2,13.5,18.8 g/s Screw Speed:240r.p.m No
Standard Accessories NSK four-way high speed air turbine H.P 2sets NSK four-way low speed air motor H.P 1set Thermostant rinsing water supply 1set Three way springe, for cold and hot 1piece each Operating light 1set Water suction and saliva e
2BVC Series Water Ring Vacuum Pump and compressor is mainly used for sucking gases and water vapour. The ultimate suction pressure can reach 33mbar (97% vacuum) . When working under suction pressure below 80mbar long time, it should be connected with
YH28 Series Four Column Double Action Hydraulic Press is designed as a professional equipment for stainless steel and aluminum industry. Especially suitable for aluminum products and stainless steel products' drawing and pressing process. The main hy
YU YAO AOSI MACHANICAL & ELECTRICAL CO.,LTD is a professonal manufacturer of plastic machine.we have 3 brands of plastic machine with ourselves. all of these 3 series built in double pumps and duble PQ valve. that was a completely quiet machine
Compliant with CISCO switch / Nortel, Alcatel, 3com, Foundry, Extreme, Avaya,D-link, Enterasys, HP, RiverStone, Netgear, Accton / optical MSA SFP GLC-T(1000BASE-T Copper Transceiver) Power: 3.3V(Auto sensing) Speed: 1.25Gbps Gigabit Ethernet Di
MOLD COMPONENTS
